Živalsko vijakanje 26 x 3 za PEX-AL-PEX cevi
Koda: RCS26Podroben opis izdelka
Živalsko privijanje EK za cevi PEX-AL-PEX in PB s premerom 26 mm
Živalsko privijanje za priključitev večplastnih cevi PEX-AL-PEX in PB na razdelilne ventile, povratna privijanja, ventile VK, termostatske ventile ter regulacijska privijanja s priključkom 1" M.
Uporaba je možna za radiatorsko in talno gretje ter cevovode tople vode. Notranji obroč se stisne in prime cev. Ob razstavljanju zadostuje, da odvijete spojko in cev izvlečete.
Ob montaži morate upoštevati dimenzijo živalskega privijanja glede na dimenzijo priključne cevi.
Lastnosti izdelka:
- vijak: 1"M
- moment zategovanja: 25 - 35 Nm
- premer cevi: 26 mm
- za pexalpex ali polibutil
- alt, kod: 750605
Pogosta vprašanja
- Za kaj natančno služi to živalsko privijanje? Omogoča snemljivo, tesno priključitev aluminijasto-plastičnih (PEX-AL-PEX) cevi na kovinski navojni priključek (npr. na razdelilnik ali armaturko) brez potrebe po orodju za stiskanje - zadostuje običajen ključ.
- Kako se privijanje montira? Na konec cevi se natakne matica in objemni obroč, nato se cev potisne do konca v telo privijanja in matica privije - podroben postopek najdete v opisu proizvoda.
- Ali lahko spoj razstavim in znova sestavim? Da, za razliko od stisnjenih spojov je živalsko privijanje mogoče večkrat razstavljati in sestavljati, kar pride prav zlasti pri morebitnih popravilih ali predelavah sistema.
- Ali potrebujem posebno orodje? Ne, za privijanje zadostuje običajen (vilicni) ključ, nobeno stiskalno orodje ni potrebno.
Dodatni parametri
| Kategorija: | pripomočki za montažo |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.1 kg |
| Thread: | 1"M |
| Alt, kod: | 750605 |
| Premer cevi: | 26 mm |
| Zavrnitveni moment: | 25 - 35 Nm |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Seznam razprav
Jozef
Atria.sk
Push-fit Pipe fittings
Push-fit pipes and plumbing fittings are a great alternative to traditional fittings. A quick way to replace or repair plumbing installations around the home. They’re easy to install and don’t need to be soldered, making them suitable for all kinds of piping and fixtures in your home’s plumbing system.
You can create a water-tight seal on any pipes when you use push-fit waste connectors, so you’ll never need to worry about leaks again. Plastic push-fit plumbing fittings are usually demountable, whereas copper fittings are not.
Suitable for hot and cold water and central heating systems our Wavin Hep2O push-fit fittings are available in a range of sizes and come with a 50-year guarantee for extra peace of mind.
Underfloor Heating Pipe
Wavin Hep2O has a range of underfloor heating systems for new and existing floors and offers high quality, proven products that are widely available from plumbers and builders merchants nationwide. Underfloor heating systems consist of a series of pipework that is connected underneath the floor that is linked to the heating system. This allows heated water to pass underneath the floor, and the space above is more evenly heated than with other traditional forms of heating.
