Živalski vijak - za večplastne cevi ALPEX - 20x2 ALU-EK IVAR.TA 4420
Koda: 500914Sorodni izdelki
Podroben opis izdelka
- PN 10, T = +120 °C
- vijak Eurokonus (EK) ali M 24
- material medenina CW617N, tesnilni obroč - EPDM
- zategovalni moment 25 - 35 Nm
- primerno za cevi ALPEX
Za pravilno vgradnjo živalskega vijaka sledite tem navodilom:
1. Montažo živalskega vijaka izvedite v vrstnem redu in smeri, kot je prikazano na naslednjih slikah.
2. Vstavite cev in ustrezno EPDM tesnilo v šobo in se prepričajte, da je vse čisto in da ni prišlo do poškodbe tesnilnega O-obroča.
3. Namestite matico na navoj in ročno privijte, za popolno privijanje uporabite ključ ustrezne velikosti AC 670 / AC 671
Gumeni deli ne smejo biti v nobenem primeru mazani z mineralnimi olji, za material EPDM je treba uporabiti samo mazivo na osnovi silikona.
Pogosta vprašanja
- Kako izbrati pravo velikost fitinga? Dimenzija navoja mora natančno ustrezati navoju na cevi ali armaturi, na katero se fiting priključi - kratice FF (notranji-notranji navoj) in MF (zunanja-notranja) v imenu označujejo vrsto navoja na posameznih straneh.
- Ali je pri montaži potreben tesnilni material? Da, za navojne spoje se standardno uporablja teflonska folija ali konopno vlakno z tesnilno pasto, da se zagotovi popolna tesnost spoja.
- Ali mora montažo izvesti strokovnjak? Enostavno navojno povezavo lahko pri osnovni spretnosti obvlada tudi domači mojster, pri posegu v že delujočo napeljavo (zlasti plinsko) priporočamo, da povabite inštalaterja, ki hkrati preveri tesnost povezave.
Dodatni parametri
| Kategorija: | objemni holandec za večplastno cev alpex |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.07 kg |
| Materiál: | mosadz CW617N |
| Prevádzková teplota: | +120 °C |
| Nominálni pritisak: | PN 10 |
| Posledná aktuálizacia ceny: | 13.04.2026 1:08:48 |
Ocena izdelka
Pustite oceno
Seznam ocen
Jozef
Dorota Sugarova - ATRIA
(Administrator)
Razprava
Seznam razprav
milan
atria
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.