Toplotni izmenjevalnik zrak/voda IVAR.PROFI-AIR HCWC za nezmrzljivo tekočino – DN 160, 2,2 kW
Koda: I07814280Podroben opis izdelka
Izmenjevalnik IVAR.PROFI-AIR HCWC s kodo I07814280 je izmenjevalnik tipa zrak/voda za kanal DN 160. Vgradi se v kanal dovoda zunanjega zraka v centralno prezračevalno enoto in priključi na krog z nezmrzljivo tekočino, tako da je prezračevanje mogoče vključiti v način ogrevanja in hlajenja.
Podatki o moči
- grelna moč 2190 W pri pretoku zraka 350 m³/h (zrak 20 °C / 60 % RV, voda 50/45 °C)
- skupna hladilna moč 2210 W, občutna 1180 W pri pretoku 350 m³/h (zrak 27 °C / 60 % RV, voda 7/12 °C)
- tlačna izguba na strani vode 24 kPa, na strani zraka 18 Pa
- hidravlična priključka 1/2" z zunanjim navojem
Svež zrak tako vstopa v rekuperacijsko enoto že predgret ali predhlajen. Za manjše pretoke je na voljo model DN 125 (1,1 kW, koda I07814270). Priključitev na ogrevalni in hladilni krog naj načrtuje in izvede strokovnjak.
Tehnični podatki
| Koda | I07814280 |
| Znamka | IVAR |
| Tip | IVAR.PROFI-AIR HCWC |
| Priključek na kanal | DN 160 |
| Grelna moč | 2190 W (350 m³/h) |
| Skupna hladilna moč | 2210 W (350 m³/h) |
| Občutna hladilna moč | 1180 W |
| Tlačna izguba vode | 24 kPa |
| Tlačna izguba zraka | 18 Pa |
| Hidravlični priključek | 1/2" ZN |
| Medij | nezmrzljiva tekočina |
Pogosta vprašanja
Kam se vgradi izmenjevalnik?
V kanal dovoda zunanjega zraka v centralno prezračevalno enoto. Namenjen je predgrevanju ali predhlajenju svežega zraka.
Kakšno moč ima izmenjevalnik DN 160?
Pri vodi 50/45 °C in pretoku 350 m³/h odda 2190 W toplote, pri vodi 7/12 °C in pretoku 350 m³/h pa je njegova skupna hladilna moč 2210 W.
Kako se izmenjevalnik priključi na vodni krog?
Hidravlična priključka imata zunanji navoj 1/2". Krog je predviden za nezmrzljivo tekočino, kot navaja ime izdelka.
Dodatni parametri
| Kategorija: | dodatna oprema za enote IVAR.PROFI-AIR |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | montažni pribor |
| Koda: | I07814280 |
| Znamka: | IVAR |
| Tip: | IVAR.PROFI-AIR HCWC |
| Priključek na kanal: | DN 160 |
| Grelna moč: | 2190 W (350 m³/h) |
| Skupna hladilna moč: | 2210 W (350 m³/h) |
| Občutna hladilna moč: | 1180 W |
| Tlačna izguba vode: | 24 kPa |
| Tlačna izguba zraka: | 18 Pa |
| Hidravlični priključek: | 1/2" ZN |
| Medij: | nezmrzljiva tekočina |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.