Stiskalna spojka PPSU 26x26 IVAR.V PPSU – ravna spojka za cevi ALPEX
Koda: 82826100Podroben opis izdelka
Spojka za cevi enakega premera
Spojka IVAR.V PPSU 26x26 je del stiskalnega sistema IVAR.PRESS. Služi za podaljšanje ali popravilo vodov iz večplastnih cevi ALPEX in TURATEC oziroma cevi PEX dimenzije 26 x 3,0 mm. Uporablja se v razvodih do radiatorjev, v toplovodnem talnem ogrevanju in v sanitarnih instalacijah; za stik s pitno vodo ima higienski atest.
Materiali in mere
- ohišje iz polifenilsulfona (PPSU), odporno proti koroziji in oblogam
- stiskalna puša iz nerjavnega jekla AISI 304, O-tesnila iz EPDM
- pozicionirni obroč iz polikarbonata z okenci za kontrolo vstavitve cevi
- vgradna dolžina L1 76 mm, Z1 5 mm, masa 50 g
Stiskanje in montaža
Spoj se stiska radialno s čeljustmi ustreznega premera (profil B/F/TH), izključno z odobreno stiskalno napravo po IVAR navodilih za spajanje cevi s fitingi IVAR.PRESS. Cev je treba odrezati pravokotno, kalibrirati in posneti robove; nasajanje lahko olajšate z vodo, olja ali drugega maziva ne uporabljajte. Spoj nastane brez odprtega plamena, s tlakom ga je mogoče obremeniti takoj po stiskanju in sme biti vgrajen v tla, jašek ali pod omet. Če stiskanje pozabite, spojka pri tlačnem preizkusu v območju od 1 do 6,5 bar pušča, zato se napaka pokaže še pred zaprtjem instalacije.
Tehnični podatki
| Koda | 82826100 |
| Proizvajalec | IVAR |
| Tip | IVAR.V PPSU |
| Dimenzija | 26x26 mm |
| Cev | 26 x 3,0 mm (ALPEX, TURATEC, PEX) |
| Najv. delovni tlak | PN 10 |
| Temperaturno območje | +3 °C do +95 °C |
| Material ohišja | PPSU (polifenilsulfon) |
| Stiskalna puša | nerjavno jeklo AISI 304 |
| Tesnjenje | O-tesnilo EPDM |
| Stiskalne čeljusti | profil B/F/TH |
| Vgradna dolžina L1 | 76 mm |
| Masa | 50 g |
Pogosta vprašanja
Katere cevi poveže spojka 26x26?
Dve cevi z zunanjim premerom 26 mm – večplastni ALPEX in TURATEC ali PEX dimenzije 26 x 3,0 mm. IVAR navodila ne dovoljujejo kombiniranja sistema s cevmi in fitingi drugih proizvajalcev.
S katerimi čeljustmi se spojka stiska?
Za to dimenzijo IVAR odobrava čeljusti profila B/F/TH. Stiska se z napravo s seznama združljivosti v navodilih IVAR.PRESS, na primer REMS IVAR.MINI-PRESS ali NOVOPRESS IVAR.ACO.
Ali spoj lahko ostane vgrajen v steno ali tla?
Da, stisnjeni spoji IVAR.PRESS so lahko nedostopni v tleh, jašku in pod ometom. Sistem pa je treba zaščititi pred UV sevanjem in vremenskimi vplivi.
Ali je spojko po stiskanju mogoče ponovno uporabiti?
Ne. Po IVAR navodilih fitinga, ki je bil že enkrat stisnjen, ni dovoljeno ponovno uporabiti.
Dodatni parametri
| Kategorija: | ravne spojke press - PPSU |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.05 kg |
| Vrsta fitinga: | nipel |
| Premer cevi: | 26 mm |
| Material: | plastika |
| Tip priključka: | stiskalni spoj |
| Koda: | 82826100 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.V PPSU |
| Dimenzija: | 26x26 mm |
| Cev: | 26 x 3,0 mm (ALPEX, TURATEC, PEX) |
| Najv. delovni tlak: | PN 10 |
| Temperaturno območje: | +3 °C do +95 °C |
| Material ohišja: | PPSU (polifenilsulfon) |
| Stiskalna puša: | nerjavno jeklo AISI 304 |
| Tesnjenje: | O-tesnilo EPDM |
| Stiskalne čeljusti: | profil B/F/TH |
| Vgradna dolžina L1: | 76 mm |
| Masa: | 50 g |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.