Stiskalna spojka IVAR.MP 5736 28x32/3 – prehod s cevi ALPEX 32x3 na cev Cu / C-STEEL Ø 28 mm
Koda: 512119MPCPodroben opis izdelka
Spojka IVAR.MP 5736 v dimenziji 28x32/3 (koda 512119MPC) povezuje dva stiskalna sistema: na eni strani večplastno cev ALPEX 32x3, na drugi bakreno cev ali cev iz ogljikovega jekla IVAR.C-STEEL z zunanjim premerom 28 mm. Obe strani se spojita s stiskanjem, zato prehod ne potrebuje navojnega vmesnika.
- stran ALPEX 32x3: stiskalne čeljusti profila B, BE, TH, F, H, R ali U
- stran Cu / C-STEEL Ø 28 mm: stiskalne čeljusti profila M, V ali SA
- največji delovni tlak PN 10, največja temperatura +100 °C
- ohišje iz ponikljane medenine CW617N, tulec iz nerjavnega jekla, tesnilo EPDM
Spojka se uporabi povsod, kjer se v isti napeljavi cev ALPEX sreča z bakreno ali jekleno stiskalno cevjo. Vsako stran stisnite s čeljustmi ustreznega profila in dimenzije; cev ALPEX pred nasaditvijo pravokotno odrežite, kalibrirajte in posnemite.
Tehnični podatki
| Koda | 512119MPC |
| Proizvajalec | IVAR |
| Tip | IVAR.MP 5736 |
| Vrsta | stiskalna spojka ALPEX – Cu / C-STEEL |
| Dimenzija | 28x32/3 |
| Stran ALPEX | 32x3 mm |
| Stran Cu / C-STEEL | Ø 28 mm |
| Čeljusti – stran ALPEX | B, BE, TH, F, H, R, U |
| Čeljusti – stran Cu / C-STEEL | M, V, SA |
| Največji tlak / temperatura | PN 10 / +100 °C |
| Material | ponikljana medenina CW617N, inox tulec, tesnilo EPDM |
Pogosta vprašanja
Katere cevi povezuje spojka 28x32/3?
Na eni strani večplastno cev ALPEX 32x3, na drugi bakreno cev ali cev IVAR.C-STEEL z zunanjim premerom 28 mm.
Katere stiskalne čeljusti so potrebne?
Stran ALPEX se stisne s čeljustmi profila B, BE, TH, F, H, R ali U, bakrena ali jeklena stran pa s profilom M, V ali SA – vedno v dimenziji, ki ustreza cevi.
Kakšne so delovne omejitve spoja?
Spojka je namenjena delovnemu tlaku do 10 bar (PN 10) in temperaturi do +100 °C. Ohišje je iz ponikljane medenine CW617N, tulec iz nerjavnega jekla, tesnilo pa iz EPDM.
Dodatni parametri
| Kategorija: | ravni nipli press - baker |
|---|---|
| Garancija: | 2 leti |
| Vrsta fitinga: | nipel |
| Premer cevi: | 28 mm, 32 mm |
| Material: | nikljana medenina |
| Tip priključka: | stiskalni spoj |
| Koda: | 512119MPC |
| Proizvajalec: | IVAR |
| Tip: | IVAR.MP 5736 |
| Vrsta: | stiskalna spojka ALPEX – Cu / C-STEEL |
| Dimenzija: | 28x32/3 |
| Stran ALPEX: | 32x3 mm |
| Stran Cu / C-STEEL: | Ø 28 mm |
| Čeljusti – stran ALPEX: | B, BE, TH, F, H, R, U |
| Čeljusti – stran Cu / C-STEEL: | M, V, SA |
| Največji tlak / temperatura: | PN 10 / +100 °C |
| Material: | ponikljana medenina CW617N, inox tulec, tesnilo EPDM |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.