Vezni nipel FASTEC IVAR.KA 00 za medsebojno povezavo razdelilnikov – FASTEC Quick F13 – AKCIJA IVAR.KA 00
Koda: KA00K00008Sorodni izdelki
Podroben opis izdelka
Povezava razdelilnikov TECOFIX
Nipel IVAR.KA 00 (koda KA00K00008) združi dva razdelilnika hladne in tople vode TECOFIX v eno celoto, s čimer se poveča število izhodov. Uporablja se tudi za priključitev krogelnih ventilov IVAR.T4P na razdelilnik.
Spoj FASTEC Quick
Obe strani nipla imata priključno mero FASTEC Quick F13. Spoj se zavaruje z vstavitvijo fiksirnega zatiča v zaskočni utor – hitro, zanesljivo in brez orodja. Sistem FASTEC Quick omogoča montažo in demontažo cevi različnih premerov, v sanitarnih instalacijah pa se uporablja od leta 2001.
Tehnični podatki
- najv. delovni tlak: PN 16
- delovna temperatura: od +5 °C do +95 °C
- priključek: FASTEC Quick F13 / F13
- material: medenina, O-tesnilo iz EPDM
Montažo priporočamo zaupati inštalaterju.
Tehnični podatki
| Koda | KA00K00008 |
| Proizvajalec | IVAR |
| Tip | IVAR.KA 00 |
| Vrsta izdelka | nipel za povezavo razdelilnikov |
| Priključek | FASTEC Quick F13 / F13 |
| Najv. delovni tlak | PN 16 |
| Delovna temperatura | +5 do +95 °C |
| Material | medenina, O-tesnilo EPDM |
| Uporaba | razdelilniki TECOFIX, krogelni ventili IVAR.T4P |
| Zavarovanje spoja | fiksirni zatič, brez orodja |
Pogosta vprašanja
Čemu služi nipel FASTEC IVAR.KA 00?
Poveže dva razdelilnika TECOFIX, s čimer se poveča število izhodov. Uporablja se tudi za priključitev krogelnih ventilov IVAR.T4P na razdelilnik.
Je za montažo potrebno orodje?
Ne. Spoj FASTEC Quick se zavaruje z vstavitvijo fiksirnega zatiča v zaskočni utor, brez orodja.
Kakšne delovne pogoje nipel prenese?
Namenjen je za tlak do PN 16 in temperature od +5 do +95 °C. Ohišje je iz medenine, tesnjenje zagotavlja O-tesnilo iz EPDM.
Dodatni parametri
| Kategorija: | dodatna oprema za razdelilnike vode |
|---|---|
| Garancija: | 24 |
| Koda: | KA00K00008 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.KA 00 |
| Vrsta izdelka: | nipel za povezavo razdelilnikov |
| Priključek: | FASTEC Quick F13 / F13 |
| Najv. delovni tlak: | PN 16 |
| Delovna temperatura: | +5 do +95 °C |
| Material: | medenina, O-tesnilo EPDM |
| Uporaba: | razdelilniki TECOFIX, krogelni ventili IVAR.T4P |
| Zavarovanje spoja: | fiksirni zatič, brez orodja |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.