Vstavek PRESS IVAR.MP 5736 15x16/2 – prehod iz cevi ALPEX 16x2 na cev Cu / C-STEEL Ø 15 mm
Koda: 512114MPCPodroben opis izdelka
Vstavek IVAR.MP 5736 v dimenzijah 15x16/2 (koda 512114MPC) povezuje dva stiskana sistema: na eni strani večplastno cev ALPEX 16x2, na drugi pa bakreno cev ali cev iz jekla IVAR.C-STEEL s premerom 15 mm. Obe strani se povezujeta s stiskanjem, zato prehod ne potrebuje navojnega medsestava.
- ALPEX stran 16x2: stiskalni čeljusti z obrisom B, BE, TH, F, H, R ali U
- ploščica Cu / C-STEEL Ø 15 mm: stiskalni čeljusti z konturo M, V ali SA
- največji obratovalni tlak PN 10, največja temperatura +100 °C
- telo iz nikljane medenine CW617N, objemka iz nerjavečega jekla, tesnilo EPDM
Vstavek se uporablja povsod, kjer se v enem razdelku srečujejo cevi ALPEX s bakrenimi ali jeklenimi stiskanimi cevmi. Vsako stran stisnite s čeljustjo pravilnega profila in velikosti; cev ALPEX pred vstavitvijo pravokotno odrežite, kalibrirajte in odrgnite.
Tehnični parametri
| Koda | 512114MPC |
| Proizvajalec | IVAR |
| Vrsta | IVAR MP 5736 |
| Vrsta | ALPEX stiskalno čepilo – Cu / C-STEEL |
| Velikost | 15x16/2 |
| Stran ALPEX | 16x2 mm |
| Stran C / C-JEKL | Ø 15 mm |
| Čeljusti – stran ALPEX | B, BE, TH, F, H, R, U |
| Čeljusti – stran Cu / C-STEEL | M, V, SA |
| Največji tlak / temperatura | PN 10 / +100 °C |
| Material | nikljana medenina CW617N, nerjavna objemka, tesnilo EPDM |
Pogosta vprašanja
Kakšne cevi povezuje vtič 15x16/2?
Na eni strani večplastno cev ALPEX 16x2, na drugi strani bakreno cev ali cev IVAR.C-STEEL z zunanjim premerom 15 mm.
Kateri stiskalni čeljusti so potrebni?
Stran ALPEX stiskamo s čeljustmi z obrisom B, BE, TH, F, H, R ali U, stran medenine ali jekla z obrisom M, V ali SA – vedno v dimenziji, ki ustreza določenemu cevovodu.
Kakšni so obratovalni omejitve spoja?
Vstavek je namenjen za obratovalni tlak do 10 bar (PN 10) in temperaturo do +100 °C. Telo je iz nikljane medenine CW617N, objem iz nerjavečega jekla in tesnilo iz EPDM.
Dodatni parametri
| Kategorija: | ravni nipli press - baker |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | 512114MPC |
| Proizvajalec: | IVAR |
| Tip: | IVAR.MP 5736 |
| Vrsta: | stiskalna spojka ALPEX – Cu / C-STEEL |
| Dimenzija: | 15x16/2 |
| Stran ALPEX: | 16x2 mm |
| Stran Cu / C-STEEL: | Ø 15 mm |
| Čeljusti – stran ALPEX: | B, BE, TH, F, H, R, U |
| Čeljusti – stran Cu / C-STEEL: | M, V, SA |
| Največji tlak / temperatura: | PN 10 / +100 °C |
| Material: | ponikljana medenina CW617N, inox tulec, tesnilo EPDM |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.