Vtič za cevi PRESS - C - 15 mm IVAR.IVC50
Koda: IVC50.15Sorodni izdelki
Podroben opis izdelka
Zatika za inštalacijo cevi, IVAR.IVC50, velikost: 15 mm, pakiranje: 20 kosov
- PN 16, T = -20 °C do +85 °C - max. +120 °C
- zamašek cevi PRESS
- namenska uporaba: za ogrevalne sisteme, sprinkler sisteme s trajno vodo, tlačni suh zrak, inertne pline in industrijo
- material: karbonska pocinkana jekla, O-ring EPDM
- Kompatibilna z čeljustmi tipa M
- inštalacija centralnega ogrevalnega sistema v zaprtem (tlačnem) sistemu
- inštalacija hladne vode in hlajenja
- inštalacija protipožarne vodovodne napeljave
- inštalacija klimatskih naprav
- inštalacija cevi za solarne sisteme
- hitra in varna montaža brez varjenja in izdelave navojnih spojev
- širok spekter premerov cevi in fitingov od 15 mm do 108 mm
- širok razpon delovnih temperatur -20 °C do +180 °C
- odpornost na visoke tlake do 16 bar
- možnost kombinacije z drugimi sistemi
- nizka teža cevi in fitingov
- visoka estetika montaže
- odpornost proti mehanskim poškodbam
Cevovoda ni certificiran za pitno vodo.
Pogosta vprašanja
- Kakšno orodje potrebujem za montažo tega fitinga? Stiskalni (press) fitingi zahtevajo specializirane stiskalnice s pravilnim tipom čeljusti (običajno označene B, F ali TH glede na sistem) ustrezne velikosti in tipa fitinga - brez pravega orodja se spoj ne da ustvariti niti preveriti.
- Kako vem, da je spoj pravilno stisnjen? Kvalitetni press fitingi imajo indikator stiskanja (npr. tesnilni O-obroč, ki pri nepopolnem stiskanju pušča) - pred zalitjem v steno ali estrih je vedno potrebno opraviti tlačno preizkušnjo celotnega sistema.
- Ali se spoj po stiskanju lahko razstavi? Ne, za razliko od privijačenega (zvernega) šrobenja je stisnjen spoj trajen in njegovo razstavljanje zahteva rezanje fitinga in zamenjavo z novim.
- Ali mora montažo izvesti strokovnjak? Da, stiskanje fitingov zahteva strokovno znanje in pravilno umerjeno orodje - priporočamo, da zaupate kurjaču/inštalaterju, še posebej pri spojih, ki bodo zaliti v steno ali v estrihu brez možnosti poznejše kontrole.
Dodatni parametri
| Kategorija: | IVAR.IVC50, IVC51 - pokrovček, čep |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.027 kg |
| Materiál: | uhličnata zelezna |
| Prevádzková teplota: | -20 °C |
| Nominálni pritisak: | PN 16 |
| Odolnost na visokih pritiskih do: | 16 bar |
| Posledná aktuálizacia ceny: | 13.04.2026 1:03:05 |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.