Kapa PRESS-PPSU IVAR.Z PPSU 16 za zapiranje cevi ALPEX, TURATEC in PEX 16x2
Koda: 82816820Podroben opis izdelka
Kapa IVAR.Z PPSU 16 (koda 82816820) zapre konec cevi 16x2 v stiskalnem sistemu IVAR.PRESS – na večplastnih ceveh ALPEX in TURATEC ter na ceveh PEX.
- ohišje iz polifenilsulfona (PPSU), stiskalni tulec iz nerjavnega jekla AISI 304, O-tesnilo EPDM, pozicionirni obroč iz polikarbonata
- največji delovni tlak PN 10, temperaturno območje +3 do +95 °C
- higienski atest za pitno vodo
- vgradna dolžina 31 mm, masa 12 g
- radialno stiskanje s čeljustmi profila B ali F (po navodilih tudi TH)
Cev pred nasaditvijo pravokotno odrežite, kalibrirajte in posnemite, njen pravilen položaj pa preverite skozi okenca pozicionirnega obroča. Pozabljeno stiskanje se pokaže kot puščanje pri tlačnem preizkusu v območju od 1 do 6,5 bar. Že stisnjene kape ni dovoljeno ponovno uporabiti.
Tehnični podatki
| Koda | 82816820 |
| Proizvajalec | IVAR |
| Tip | IVAR.Z PPSU |
| Vrsta | stiskalna kapa (zapiranje) |
| Dimenzija | 16 |
| Primerne cevi | ALPEX, TURATEC, PEX 16x2 |
| Vgradna dolžina L1 | 31 mm |
| Masa | 12 g |
| Največji delovni tlak | PN 10 |
| Temperaturno območje | +3 do +95 °C |
| Stiskalne čeljusti | B, F (tudi TH) |
| Material | PPSU, tulec AISI 304, O-tesnilo EPDM, obroč PC |
Pogosta vprašanja
Čemu je namenjena kapa PRESS-PPSU 16?
Zapre konec cevi ALPEX, TURATEC ali PEX premera 16 mm (16x2). Že stisnjene kape ni dovoljeno ponovno uporabiti.
S katero čeljustjo se stisne kapa?
Radialno, s čeljustjo profila B ali F za premer 16 mm; navodila dopuščajo tudi profil TH. Cev pred nasaditvijo pravokotno odrežite, kalibrirajte in posnemite.
Ali se pozabljeno stiskanje odkrije?
Da, nestisnjena kapa pri tlačnem preizkusu v območju od 1 do 6,5 bar pušča, zato se napaka odkrije še pred zaprtjem napeljave.
Dodatni parametri
| Kategorija: | čepi press, push - PPSU |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.012 kg |
| Vrsta fitinga: | čep / pokrovček |
| Premer cevi: | 16 mm |
| Material: | nerjavno jeklo |
| Tip priključka: | vtični (push) |
| Koda: | 82816820 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.Z PPSU |
| Vrsta: | stiskalna kapa (zapiranje) |
| Dimenzija: | 16 |
| Primerne cevi: | ALPEX, TURATEC, PEX 16x2 |
| Vgradna dolžina L1: | 31 mm |
| Masa: | 12 g |
| Največji delovni tlak: | PN 10 |
| Temperaturno območje: | +3 do +95 °C |
| Stiskalne čeljusti: | B, F (tudi TH) |
| Material: | PPSU, tulec AISI 304, O-tesnilo EPDM, obroč PC |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.