Ventil za preprečevanje kroženja hladne vode AQUASTOP IVAR.AC 618 – 1" F × 1" M IVAR.AC 618
Koda: 500495Sorodni izdelki
Podroben opis izdelka
Ventil IVAR.AC 618 s trgovskim imenom AQUASTOP (koda 500495) je namenjen sistemom, ki pozimi ogrevajo, poleti pa hladijo po istem razvodu. Dokler teče topla ogrevalna voda, ventil ostane odprt. Ko temperatura vode pade na +19 °C, vgrajeni termostatski vložek zapre pretok in hladilna voda ne pride do grelnih teles niti kopalniških radiatorjev, na površini katerih bi se sicer kondenzirala vlaga.
Mesto vgradnje in montaža
- ventil mora biti vgrajen pred grelnim telesom, torej na njegov vstop
- navodila priporočajo vgradnjo pod razdelilnik na vstopu v sistem
- pri montaži upoštevajte smer pretoka, označeno s puščico na ohišju ventila
- armaturo montirajte brez napetosti z ustreznim ključem; prevelik zatezni moment lahko poškoduje ohišje
Tehnični podatki
- priključek 1" notranji navoj × 1" zunanji navoj
- največji obratovalni tlak 10 bar, največja obratovalna temperatura +80 °C
- temperatura zapiranja +19 °C ± 1,5 °C, največja tlačna razlika na ventilu 1 bar
- ohišje iz nikljane medenine CW617N, zaporni elementi iz nerjavnega jekla, O-tesnilo iz EPDM
Za tesnjenje navojev so primerni PTFE trakovi, vrvice in niti, tesnilne paste ali geli. Konoplja ni priporočljiva, ker grozi pretesno privijanje in razpoka ohišja armature. V seriji IVAR.AC 618 je tudi izvedba 500522 s priključkom 3/4" F × evrokonus.
Tehnični podatki
| Koda | 500495 |
| Proizvajalec | IVAR |
| Tip | IVAR.AC 618 (AQUASTOP) |
| Vrsta | termostatski ventil za preprečevanje kroženja hladne vode |
| Priključek | 1" F × 1" M |
| Temperatura zapiranja | +19 °C ± 1,5 °C |
| Največji obratovalni tlak | 10 bar |
| Največja obratovalna temperatura | +80 °C |
| Največja tlačna razlika | 1 bar |
| Material ohišja | nikljana medenina CW617N |
| Zaporni elementi | nerjavno jeklo |
| Tesnilo | O-tesnilo EPDM |
Pogosta vprašanja
Kdaj ventil AQUASTOP zapre pretok?
Ko temperatura vode, ki teče skozenj, pade na +19 °C (toleranca ±1,5 °C), termostatski vložek zapre ventil. Pri toplejši ogrevalni vodi ostane ventil odprt.
Kam se ventil vgradi?
Pred grelno telo, torej na njegov vstop. Navodila priporočajo tudi vgradnjo pod razdelilnik na vstopu v sistem, vedno v smeri puščice na ohišju.
S čim zatesniti navoje?
Primerni so PTFE trakovi, vrvice in niti, tesnilne paste ali geli. Konoplja ni priporočljiva, ker grozi pretesno privijanje in poškodba ohišja armature.
Kakšen priključek ima ta izvedba?
Koda 500495 ima na eni strani notranji navoj 1", na drugi pa zunanji navoj 1". Izvedba 500522 ima priključek 3/4" F × evrokonus.
Dodatni parametri
| Kategorija: | dodatna oprema |
|---|---|
| Garancija: | 24 |
| Koda: | 500495 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.AC 618 (AQUASTOP) |
| Vrsta: | termostatski ventil za preprečevanje kroženja hladne vode |
| Priključek: | 1" F × 1" M |
| Temperatura zapiranja: | +19 °C ± 1,5 °C |
| Največji obratovalni tlak: | 10 bar |
| Največja obratovalna temperatura: | +80 °C |
| Največja tlačna razlika: | 1 bar |
| Material ohišja: | nikljana medenina CW617N |
| Zaporni elementi: | nerjavno jeklo |
| Tesnilo: | O-tesnilo EPDM |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.