Naprava za pripravo vode z reverzno osmozo IVAR.SOLO – dvostopenjska 2 v 1, neposredni pretok 78 l/h, 300 × 140 × 200 mm – AKCIJA
Koda: ESMO1500PECOPodroben opis izdelka
Čista voda neposredno v kuhinji
IVAR.SOLO je majhna naprava z reverzno osmozo, namenjena vgradnji na mestu porabe, na primer v kuhinjski element. Celotno obdelavo opravi en sam vložek 2 v 1: membrana reverzne osmoze 500 GPD zadrži do 99 % nečistoč, vključno z virusi in bakterijami, ter zmanjša vsebnost PFAS, ogljikov blok iz kokosovih vlaken pa nato izboljša okus in vonj vode. Obdelana voda teče neposredno s pretokom 1,3 l/min (78 l/h).
Varčno in varno delovanje
- izkoristek 50 % – do 50 % prihranka vode
- samodejno izpiranje membrane podaljša njeno življenjsko dobo
- samodejni izklop po 120 minutah neprekinjenega delovanja
- detektor puščanja vode
- zaslon s prikazom napake in življenjske dobe vložka
- suha menjava vložka v manj kot 5 minutah
Vgradnja in pogoji
Priložen je komplet za vgradnjo, priključki so navojni 1/2" in 3/8", napajanje 230 V / 50 Hz. Vstopni tlak vode mora biti od 1 do 4 bar – zato pred napravo spada reducirni ventil – temperatura vode pa od +5 do +30 °C. Mikrobiološko neustrezne vode ali vode neznane kakovosti ne uporabljajte brez zadostne dezinfekcije. Na izhod lahko dodate mineralizacijski postfilter IVAR.MFV (ESPD2010ECO), ki vodo obogati z minerali. Nadomestni vložek RO plus ima kodo ESCSVPDRO500 in se menja vsakih 12 mesecev.
Tehnični podatki
| Koda | ESMO1500PECO |
| Znamka | IVAR |
| Tip | IVAR.SOLO (IVAR.CROSS SOLO) |
| Sistem | dvostopenjska reverzna osmoza 2 v 1 |
| Neposredni pretok | 1,3 l/min (78 l/h) |
| Membrana | RO 500 GPD + ogljikov blok |
| Izkoristek (prihranek vode) | 50 % |
| Vstopni tlak vode | 1–4 bar |
| Temperatura vstopne vode | +5 do +30 °C |
| Priključek | 1/2", 3/8" navojni |
| Napajanje | 230 V, 50 Hz |
| Mere (v × š × g) | 300 × 140 × 200 mm |
| Masa | 4,3 kg |
| Interval menjave | 12 mesecev |
| Nadomestni vložki | ESCSVPDRO500 |
Pogosta vprašanja
Kako pogosto se menja vložek v napravi IVAR.SOLO?
Proizvajalec priporoča menjavo vsakih 12 mesecev, pri slabši vstopni vodi ali večji porabi tudi prej. Nadomestni vložek RO plus ima kodo ESCSVPDRO500, menjava je suha in traja manj kot 5 minut.
Ali naprava vodi dodaja minerale?
Sama naprava ne, na njen izhod pa lahko dodate mineralizacijski postfilter IVAR.MFV (koda ESPD2010ECO), ki vodo obogati z minerali.
Zakaj se priporoča zjutraj izliti prve kozarce vode?
Med nočnim mirovanjem lahko del raztopljenih snovi naravno difundira skozi membrano, zato jih voda zjutraj vsebuje nekoliko več. Proizvajalec zato priporoča, da prva dva kozarca izlijete ali ju porabite za zalivanje rož.
Dodatni parametri
| Kategorija: | UV svetilke in reverzne osmoze |
|---|---|
| Garancija: | 2 leti |
| Teža: | 4.3 kg |
| Vrsta: | reverzna osmoza |
| Koda: | ESMO1500PECO |
| Znamka: | IVAR |
| Tip: | IVAR.SOLO (IVAR.CROSS SOLO) |
| Sistem: | dvostopenjska reverzna osmoza 2 v 1 |
| Neposredni pretok: | 1,3 l/min (78 l/h) |
| Membrana: | RO 500 GPD + ogljikov blok |
| Izkoristek (prihranek vode): | 50 % |
| Vstopni tlak vode: | 1–4 bar |
| Temperatura vstopne vode: | +5 do +30 °C |
| Priključek: | 1/2", 3/8" navojni |
| Napajanje: | 230 V, 50 Hz |
| Mere (v × š × g): | 300 × 140 × 200 mm |
| Masa: | 4,3 kg |
| Interval menjave: | 12 mesecev |
| Nadomestni vložki: | ESCSVPDRO500 |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.