Naprava za obdelavo vode z reverzno osmozo in petstopenjskim filtriranjem IVAR.ESTELLE 600
Koda: 5113590041Podroben opis izdelka
Naprava IVAR.ESTELLE 600 očisti vodo v petih stopnjah: sedimentni filter 5 μm, blok stisnjenega aktivnega oglja, membrana reverzne osmoze 600 GPD, drugi ogljeni blok in mineralizacijski vložek. Ima vgrajeno črpalko, po navedbah proizvajalca pa odstrani do 99,8 % škodljivih snovi. Po tehničnem listu proizvede približno 12 l obdelane vode na uro in jo po osmozi mineralizira.
Tehnični podatki
- Mere (š × g × v): 160 × 450 × 400 mm
- Masa: 8 kg
- Zmogljivost obdelane vode: 12 l/h
- Število stopenj filtriranja: 5
- Membrana reverzne osmoze: 600 GPD
- Električna moč: 35 W
- Električno napajanje: 230 V, 50 Hz
- Hidravlični priključek (vhod/izhod): 3/8″
- Tlak vstopne vode: 1–5 bar
Napravo je treba priključiti na gravitacijski odtok in standardno vtičnico 230 V. V kompletu so montažni komplet, povezovalna cev in montažni ključ. Vgradnjo in zagon zaupajte strokovnemu podjetju.
Tehnični podatki
| Koda | 5113590041 |
| Proizvajalec | IVAR |
| Tip | IVAR.ESTELLE 600 |
| Mere (š × g × v) | 160 × 450 × 400 mm |
| Masa | 8 kg |
| Zmogljivost obdelane vode | 12 l/h |
| Število stopenj filtriranja | 5 |
| Membrana reverzne osmoze | 600 GPD |
| Električna moč | 35 W |
| Električno napajanje | 230 V, 50 Hz |
| Hidravlični priključek (vhod/izhod) | 3/8″ |
| Tlak vstopne vode | 1–5 bar |
Pogosta vprašanja
Kakšne zahteve ima naprava za vstopno vodo?
Tlak vstopne vode naj bo 1 – 5 bar, temperatura 5 – 35 °C, pH 6,5 – 9,5, preostali klor pa pod 0,3 mg/l. Če vrednosti ne ustrezajo, proizvajalec priporoča posvet z njegovim tehničnim oddelkom.
Kaj je treba priključiti na napravo?
Dovod vode (priključek 3/8″), gravitacijski odtok in vtičnica 230 V v dosegu priključnih kablov.
Dodatni parametri
| Kategorija: | UV svetilke in reverzne osmoze |
|---|---|
| Garancija: | 2 leti |
| Teža: | 8 kg |
| Koda: | 5113590041 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.ESTELLE 600 |
| Mere (š × g × v): | 160 × 450 × 400 mm |
| Masa: | 8 kg |
| Zmogljivost obdelane vode: | 12 l/h |
| Število stopenj filtriranja: | 5 |
| Membrana reverzne osmoze: | 600 GPD |
| Električna moč: | 35 W |
| Električno napajanje: | 230 V, 50 Hz |
| Hidravlični priključek (vhod/izhod): | 3/8″ |
| Tlak vstopne vode: | 1–5 bar |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
