Naprava za pripravo vode IVAR.ROBUST 3000 MAX z reverzno osmozo – pretok 150 l/h, 470 × 525 × 405 mm
Koda: ESROBUST3000Podroben opis izdelka
Demineralizirana voda v večjih količinah
IVAR.ROBUST 3000 MAX pripravlja visokokakovostno demineralizirano vodo tam, kjer je je treba več: za pripravo tehnološke vode, napajanje parnih kotlov, ogrevalne in hladilne kroge, gostinsko tehnologijo ter v živilski industriji in kmetijstvu. Voda teče skozi tri stopnje – polnilo iz granuliranega aktivnega oglja (AC), blok iz stisnjenega aktivnega oglja (CTO) in nazadnje dve membrani reverzne osmoze 500 GPD.
Obratovalni podatki
- pretok obdelane vode 150–160 l/h, napajalne vode 250–300 l/h, koncentrata 100–140 l/h
- delovni tlak 7–8 bar, vstopni tlak vode 2–5 bar
- vgrajeni manometri kažejo stanje črpalke
- moč 120 W, 230 V / 50 Hz, stopnja zaščite IP 54
- priključek 3/8", masa 25 kg
Vgradnja in servis
Napravo je treba priključiti na gravitacijski kanalizacijski odtok in na vtičnico 230 V v dosegu kabla; okoli nje pustite vsaj 300 mm prostora za rokovanje. V paketu so komplet za vgradnjo, povezovalna cev in montažni ključi. Montažo lahko opravi lokalno monterško podjetje, zagon pa mora izvesti pooblaščeno podjetje – sicer preneha pravica do garancijskih popravil. Predfiltri se menjajo po 40 000 l, najpozneje vsake 3 mesece, membrane RO po 80 000 l, najpozneje enkrat na leto (nadomestna membrana ESCSV3012500ECO).
Tehnični podatki
| Koda | ESROBUST3000 |
| Znamka | IVAR |
| Tip | IVAR.ROBUST 3000 MAX |
| Filtrirne stopnje | oglje AC + blok CTO + 2× membrana RO 500 GPD |
| Pretok obdelane vode | 150–160 l/h |
| Pretok napajalne vode | 250–300 l/h |
| Vstopni tlak vode | 2–5 bar |
| Delovna temperatura | +5 do +30 °C |
| Priključek | 3/8" |
| Napajanje | 230 V, 50 Hz |
| Moč | 120 W |
| Stopnja zaščite | IP 54 |
| Mere (v × š × g) | 470 × 525 × 405 mm |
| Masa | 25 kg |
| Nadomestna membrana | ESCSV3012500ECO (2 kosa v napravi) |
Pogosta vprašanja
Za kaj se uporablja IVAR.ROBUST 3000 MAX?
Za pripravo visokokakovostne demineralizirane vode – na primer tehnološke vode, vode za napajanje parnih kotlov, za ogrevalne in hladilne kroge ali za gostinske in živilske obrate.
Ali lahko napravo sam spravim v obratovanje?
Montažo lahko opravi lokalno monterško podjetje, zagon pa mora izvesti pooblaščeno podjetje. Sicer uporabnik izgubi pravico do garancijskih popravil.
Kako pogosto se menjajo filtri in membrane?
Predfiltri in naknadna filtracija po 40 000 l obdelane vode, najpozneje vsake 3 mesece; membrane RO po 80 000 l, najpozneje enkrat na leto. Pri slabši napajalni vodi so intervali lahko krajši.
Dodatni parametri
| Kategorija: | UV svetilke in reverzne osmoze |
|---|---|
| Garancija: | 2 leti |
| Teža: | 25 kg |
| Vrsta: | reverzna osmoza |
| Koda: | ESROBUST3000 |
| Znamka: | IVAR |
| Tip: | IVAR.ROBUST 3000 MAX |
| Filtrirne stopnje: | oglje AC + blok CTO + 2× membrana RO 500 GPD |
| Pretok obdelane vode: | 150–160 l/h |
| Pretok napajalne vode: | 250–300 l/h |
| Vstopni tlak vode: | 2–5 bar |
| Delovna temperatura: | +5 do +30 °C |
| Priključek: | 3/8" |
| Napajanje: | 230 V, 50 Hz |
| Moč: | 120 W |
| Stopnja zaščite: | IP 54 |
| Mere (v × š × g): | 470 × 525 × 405 mm |
| Masa: | 25 kg |
| Nadomestna membrana: | ESCSV3012500ECO (2 kosa v napravi) |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.