Manager regulacija IVAR.MANAGER za konvektorje ECI – zaslon na dotik 4,3", Wi-Fi, do 16 enot – AKCIJA IVAR.MANAGER
Koda: I07916872Sorodni izdelki
Podroben opis izdelka
IVAR.MANAGER (šifra I07916872) je nadrejena regulacija za majhne in velike sisteme s stropnimi kasetnimi konvektorji s ventilatorjem ECI v stanovanjskih, poslovnih ali javnih prostorih. Ponuja enake funkcije kot regulacija LCD20, poleg tega pa lahko z enega mesta krmili eno ali vse enote sistema – do 16 konvektorjev s komunikacijo Modbus RTU.
Funkcije
- osvetljen TFT zaslon na dotik 4,3"
- nastavitev temperature, hitrosti ventilatorja in načina ogrevanje/hlajenje, prikaz in sprememba parametrov
- dnevno in tedensko programiranje – do 8 časovnih programov za vsak dan
- Wi-Fi antena in upravljanje prek aplikacije Power IdroLAN 2.0 (Google Play, App Store)
- zvočna potrditev prejetih ukazov
Vgradnja
Regulacija se s krmilno ploščo Power IdroLAN 2.0 v konvektorju poveže s 3-žilnim podatkovnim kablom (omrežje RS-485 »Console Bus«), napajanje 230 V AC pa se dovede ločeno. Namesti se na steno v instalacijsko dozo ali vgradno v steno, na višini 1,5 m nad tlemi, na suho mesto brez prepiha in stran od virov toplote. Priključitev mora izvesti strokovnjak z elektrotehnično usposobljenostjo.
Tehnični podatki
| Šifra | I07916872 |
| Proizvajalec | IVAR |
| Tip | IVAR.MANAGER |
| Namen | konvektorji ECI |
| Število krmiljenih enot | do 16 (Modbus RTU) |
| Zaslon | TFT 4,3", na dotik |
| Povezljivost | Wi-Fi, aplikacija Power IdroLAN 2.0 |
| Programiranje | dnevno in tedensko |
| Napajanje | 230 V AC (+10 %/-15 %), 50/60 Hz |
| Poraba moči | 1,6 W |
| Stopnja zaščite | IP 30 po vgradnji |
| Obratovalna temperatura | 0–50 °C |
| Mere | 130 × 90 × 40 mm |
| Masa | 220 g |
Pogosta vprašanja
Koliko konvektorjev lahko krmili regulacija?
Do 16 konvektorjev ECI s komunikacijo Modbus RTU, posamično ali vse hkrati z enega mesta.
Ali lahko regulacijo upravljam s telefonom?
Da, regulacija ima Wi-Fi anteno in jo je mogoče upravljati tudi prek aplikacije Power IdroLAN 2.0 za Android (Google Play) in iOS (App Store).
Kako se regulacija priključi na konvektor?
Na krmilno ploščo Power IdroLAN 2.0 v napravi s 3-žilnim podatkovnim kablom prek vodila RS-485, napajanje 230 V AC pa je speljano ločeno. Priključitev mora izvesti električar.
Kam namestiti regulacijo?
Na steno na višini 1,5 m nad tlemi, na suho mesto brez prepiha, stran od radiatorjev, klimatskih naprav ali oken in virov elektromagnetnih motenj.
Dodatni parametri
| Kategorija: | Dodatna oprema za ventilatorski konvektor |
|---|---|
| Garancija: | 24 |
| Teža: | 0.22 kg |
| Šifra: | I07916872 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.MANAGER |
| Namen: | konvektorji ECI |
| Število krmiljenih enot: | do 16 (Modbus RTU) |
| Zaslon: | TFT 4,3", na dotik |
| Povezljivost: | Wi-Fi, aplikacija Power IdroLAN 2.0 |
| Programiranje: | dnevno in tedensko |
| Napajanje: | 230 V AC (+10 %/-15 %), 50/60 Hz |
| Poraba moči: | 1,6 W |
| Stopnja zaščite: | IP 30 po vgradnji |
| Obratovalna temperatura: | 0–50 °C |
| Mere: | 130 × 90 × 40 mm |
| Masa: | 220 g |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.