Toplotni izmenjevalnik zrak/voda IVAR.PROFI-AIR HCWC za nemrznjuće sredstvo – DN 160, 2,2 kW
Koda: I07814280Podroben opis izdelka
Imenik IVAR.PROFI-AIR HCWC s kodo I07814280 je izmenjevalnik tipa zrak/voda za cev DN 160. Namešča se v cev na dovodu zunanjega zraka v centralno prezračevalno enoto in se priključi na krog z antifrizom, tako da je mogoče prezračevanje priključiti v način ogrevanja in hlajenja.
Specifikacije moči
- ogrevalna moč 2190 W pri pretoku zraka 350 m³/h (zrak 20 °C / 60 % RV, voda 50/45 °C)
- Skupna hladilna moč 2210 W, čutna 1180 W pri pretoku 350 m³/h (zrak 27 °C / 60 % relativna vlažnost, voda 7/12 °C)
- tlačna izguba na strani vode 24 kPa, na strani zraka 18 Pa
- hidravlične priključke 1/2" z zunanjim navojem
Svež zrak vstopa v rekuperacijsko enoto že predhodno ogret ali ohlajen. Za manjše pretoke je na voljo model DN 125 (1,1 kW, koda I07814270). Priključitev na ogrevalni in hladilni krog mora načrtovati in izvesti strokovnjak.
Tehnični parametri
| Koda | I07814280 |
| Blagovna znamka | IVAR |
| Vrsta | IVAR.PROFI-AIR HCWC |
| Priključitev na cevovod | DN 160 |
| Grelna moč | 2190 W (350 m³/h) |
| Skupna hladilna moč | 2210 W (350 m³/h) |
| Zaznavno hladilno moč | 1180 W |
| Pada tlaka vode | 24 kPa |
| Zračni tlak | 18 Pa |
| hidravlično priključevanje | 1/2" M |
| Medij | nezamrzovalna tekočina |
Pogosta vprašanja
Kam se izmenjevalec montira?
V cevovodu na dovodu zunanjega zraka v centralno prezračevalno enoto. Služi za predgrevanje ali predhlajenje svežega zraka.
Kakšen je izhodna moč izmenjevalca DN 160?
Pri vodi 50/45 °C in pretoku 350 m³/h oddaja 2190 W toplote, pri vodi 7/12 °C in pretoku 350 m³/h pa ima skupno hladilno moč 2210 W.
Kako se izmenjevalec priključi na vodni krog?
Hidravlične priključke imajo zunanji navoj 1/2". Krog je namenjen za nemrznjočo tekočino, kot je navedeno v imenu izdelka.
Dodatni parametri
| Kategorija: | dodatna oprema za enote IVAR.PROFI-AIR |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | I07814280 |
| Znamka: | IVAR |
| Tip: | IVAR.PROFI-AIR HCWC |
| Priključek na kanal: | DN 160 |
| Grelna moč: | 2190 W (350 m³/h) |
| Skupna hladilna moč: | 2210 W (350 m³/h) |
| Občutna hladilna moč: | 1180 W |
| Tlačna izguba vode: | 24 kPa |
| Tlačna izguba zraka: | 18 Pa |
| Hidravlični priključek: | 1/2" ZN |
| Medij: | nezmrzljiva tekočina |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.