Tlačna posoda proti hidraulskim udarcem IVAR.HX-016 – 0,16 l, 15 bar, 1/2" M, nerjavna
Koda: A0D0Q01Podroben opis izdelka
IVAR.HX-016 (koda A0D0Q01) je tlačna raztezna posoda iz nerjavečega jekla AISI 304 s prostornino 0,16 l, namenjena za absorbiranje hidravličnih udarcev v cevovodu. Ko se pretok vode nenadoma ustavi – običajno s hitrim zapiranjem krogelnega ventila ali vklopom elektromagnetnega ventila – se v sistemu pojavi kratkotrajen tlačni udar. Posoda ga ujame, preden bi visok dinamični tlak obremenil iztočne armature in filtre.
Uporaba in postavitev
- hidravlični vodovodni sistemi in drugi hidravlični sistemi s pitno vodo
- vgradnja pred napravom, ki jo mora zaščititi – izlivno armaturo ali filter
- sestav s zunanjim navojem 1/2" (M)
Tehnični podatki
- prostornina 0,16 l, tlak 15 bar
- temperaturni razpon -10 °C do +99 °C, priporočena obratovalna temperatura do +80 °C
- velikost Ø 80 × 110 mm
- material nerjavno jeklo AISI 304
Zaradi dimenzij ø 80 × 110 mm se posoda prilega tudi v tesnem prostoru pri armaturah. Montažo v tlačni napeljavi prepustite strokovnjaku.
Tehnični parametri
| Koda | A0D0Q01 |
| Proizvajalec | IVAR |
| Vrsta | IVAR.HX-016 |
| Vrsta izdelka | tlačna posoda proti hidraulskim udarcem |
| Vsebina | 0,16 l |
| Tlak | 15 bar |
| Priključitev | 1/2" M (zunanji navoj) |
| Temperaturni razpon | -10 °C do +99 °C |
| Priporočena obratovalna temperatura | do +80 °C |
| Velikosti | Ø 80 × 110 mm |
| Material | nerjavna jekla AISI 304 |
| Izvedba | viseče |
Pogosta vprašanja
Na kaj služi posoda IVAR.HX-016?
Absorbira kratkoročne tlačne sunke, ki nastanejo pri nenadnem zaustavljanju pretoka, na primer po hitrem zaprtju krogelnega ventila ali elektromagnetnega ventila. S tem ščiti iztočne armature in filtre pred visokim dinamičnim tlakom.
Kam posodo namestiti?
Pred aparat, ki ga mora zaščititi, torej pred iztočno armaturo ali filter v tlačnem vodovodnem sistemu. Priključuje se z zunanjim navojem 1/2".
Do katere temperature vode jo lahko uporabim?
Proizvajalec navaja temperaturni razpon -10 °C do +99 °C. Priporočena delovna temperatura je do +80 °C.
Dodatni parametri
| Kategorija: | raztezne posode - za preprečevanje udarcev v cevovodu |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | A0D0Q01 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.HX-016 |
| Vrsta izdelka: | tlačna posoda proti hidravličnim udarom |
| Prostornina: | 0,16 l |
| Tlak: | 15 bar |
| Priključek: | 1/2" M (zunanji navoj) |
| Temperaturno območje: | -10 °C do +99 °C |
| Priporočena obratovalna temperatura: | do +80 °C |
| Mere: | ø 80 × 110 mm |
| Material: | nerjavno jeklo AISI 304 |
| Izvedba: | viseča |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.