Termostatska glava s tekočino IVAR.T 5012 s kapilaro 2 m in naležnim tipalom, +20 do +60 °C, M30 × 1,5
Koda: 501176Podroben opis izdelka
IVAR.T 5012 (koda 501176) je termostatska glava s tekočinskim polnjenjem, ki se ne odziva na temperaturo ob ventilu, temveč na temperaturo na mestu tipala. Tipalo je z glavo povezano s 2 m dolgo kapilaro, zato ga je mogoče namestiti tja, kjer je treba spremljati temperaturo. Glava se privije na ventil ali vložek s priključnim navojem M30 × 1,5 in glede na izmerjeno temperaturo zvezno pripre ali odpre pretok.
Dodatna oprema za module VARIMIX
IVAR to glavo ponuja kot dodatno opremo za mešalni kotlovski modul VARIMIX IVAR.VAR 21 s termostatskim regulacijskim vložkom. Glava tako krmili vložek modula glede na temperaturo, ki jo izmeri tipalo, brez električnega napajanja.
Lastnosti
- območje regulacije od +20 °C do +60 °C
- priključni navoj M30 × 1,5
- kapilara dolžine 2 m
- naležno tipalo premera 11,5 mm
- v kompletu sta tudi držalo tipala in montažne vzmeti
Tehnični podatki
| Koda | 501176 |
| Proizvajalec | IVAR |
| Tip | IVAR.T 5012 |
| Vrsta glave | s tekočino in oddaljenim tipalom |
| Območje regulacije | +20 do +60 °C |
| Priključek | M30 × 1,5 |
| Dolžina kapilare | 2 m |
| Tipalo | naležno, premer 11,5 mm |
| V kompletu | držalo tipala, montažne vzmeti |
| Uporaba | kotlovski modul VARIMIX IVAR.VAR 21 |
Pogosta vprašanja
Za kateri izdelek je namenjena glava IVAR.T 5012?
IVAR jo ponuja kot dodatno opremo za mešalni kotlovski modul VARIMIX IVAR.VAR 21 s termostatskim regulacijskim vložkom. Primerna je za ventile in vložke s priključnim navojem M30 × 1,5.
Kakšno temperaturno območje je mogoče nastaviti na glavi?
Območje regulacije je od +20 °C do +60 °C. Glava se odziva na temperaturo na mestu tipala, ki je z njo povezano z 2 m dolgo kapilaro.
Kaj je v kompletu?
Glava s 2 m dolgo kapilaro in tipalom, držalo temperaturnega tipala in montažne vzmeti.
Dodatni parametri
| Kategorija: | termost. glave s kapilaro |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | termostatska glava |
| Koda: | 501176 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.T 5012 |
| Vrsta glave: | s tekočino in oddaljenim tipalom |
| Območje regulacije: | +20 do +60 °C |
| Priključek: | M30 × 1,5 |
| Dolžina kapilare: | 2 m |
| Tipalo: | naležno, premer 11,5 mm |
| V kompletu: | držalo tipala, montažne vzmeti |
| Uporaba: | kotlovski modul VARIMIX IVAR.VAR 21 |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.