Sistemska toplotnoizolacijska plošča IVAR.ST 30 AL za suhi sistem – 30 mm, 1200 × 600 mm (0,72 m²)
Koda: ST30ALPodroben opis izdelka
Plošča IVAR.ST 30 AL (koda ST30AL) je sistemska toplotnoizolacijska plošča za toplovodno talno ogrevanje v suhem sistemu. Primerna je povsod, kjer betonskega estriha ali samorazlivne mase ni mogoče ali ni smiselno uporabiti – pri prenovah, kjer bi estrih preveč obremenil konstrukcijo, v lesenih hišah, občutljivih na vlago, ali pri majhni razpoložljivi višini tal.
Lastnosti plošče
- debelina 30 mm, format in uporabna mera 1200 × 600 mm = 0,72 m²
- za cevi PE-RT 16 × 2 mm z razmikom polaganja 150 mm
- površinska aluminijasta plast debeline 100–200 µm razporeja toploto po površini
- izolacija EPS 300: toplotna prevodnost λD 0,0318 W/mK, toplotna upornost RD 0,95 m²K/W
- razred odziva na ogenj E, skladno z DIN EN 13163
Sestava tal
Na ploščo se polagajo talne mavčno-vlaknene plošče – proizvajalec priporoča Fermacell ali Knauf debeline 25 mm, nanje je mogoče lepiti keramične ploščice. Pod laminat zadošča mavčno-vlaknena plošča debeline 12,5 mm. Če potrebujete čim nižjo sestavo, sistem z 20-milimetrsko ploščo ST20AL doseže skupno višino 45 mm brez končne obloge. Na stabilni in nosilni podlagi je keramične ploščice mogoče položiti tudi neposredno na ploščo. V primerjavi z 20-milimetrsko ploščo ima ST30AL večjo toplotno upornost (0,95 namesto 0,65 m²K/W).
Tehnični podatki
| Koda | ST30AL |
| Znamka | IVAR |
| Tip | IVAR.ST 30 AL |
| Sistem | suhi sistem talnega ogrevanja |
| Debelina | 30 mm |
| Format | 1200 × 600 mm |
| Uporabna površina | 0,72 m² |
| Razmik polaganja | 150 mm |
| Cevi | PE-RT 16 × 2 mm |
| Izolacija | EPS 300 |
| Toplotna prevodnost λD | 0,0318 W/mK |
| Toplotna upornost RD | 0,95 m²K/W |
| Debelina AL plasti | 100–200 µm |
| Razred odziva na ogenj | E |
Pogosta vprašanja
Ali pri tej plošči potrebujem betonski estrih?
Ne. Plošča je namenjena suhemu sistemu, v katerem estrih nadomeščajo talne mavčno-vlaknene plošče – proizvajalec priporoča Fermacell ali Knauf debeline 25 mm.
Katere cevi se polagajo v ploščo?
Cevi PE-RT z zunanjo mero 16 × 2 mm z razmikom polaganja 150 mm.
Kakšna je razlika med ploščama ST20AL in ST30AL?
ST20AL je debela 20 mm, ima izolacijo EPS 400 in toplotno upornost 0,65 m²K/W. ST30AL je debela 30 mm, ima EPS 300 in toplotno upornost 0,95 m²K/W.
Dodatni parametri
| Kategorija: | IVAR IZOLACIJA |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | sistemska plošča |
| Koda: | ST30AL |
| Znamka: | IVAR |
| Tip: | IVAR.ST 30 AL |
| Sistem: | suhi sistem talnega ogrevanja |
| Debelina: | 30 mm |
| Format: | 1200 × 600 mm |
| Uporabna površina: | 0,72 m² |
| Razmik polaganja: | 150 mm |
| Cevi: | PE-RT 16 × 2 mm |
| Izolacija: | EPS 300 |
| Toplotna prevodnost λD: | 0,0318 W/mK |
| Toplotna upornost RD: | 0,95 m²K/W |
| Debelina AL plasti: | 100–200 µm |
| Razred odziva na ogenj: | E |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.