UV sterilizator vode IVAR.UV LIGHT KIT MAX IVA.HA365 – 6/4", 4536 l/h, 65 W
Koda: IVA.HA365Podroben opis izdelka
Kako deluje UV sterilizator
V polirani komori iz nerjavnega jekla AISI 304 je UV sijalka v zaščitni cevi iz kvarčnega stekla. Nizkotlačna sijalka seva monokromatsko UVC sevanje z valovno dolžino 254 nm, ki poškoduje RNK in DNK mikroorganizmov, zato se ne morejo razmnoževati. Doza obsevanja presega 40 mJ/cm².
Model FC-20
- največji pretok 4536 l/h
- priključek 1 1/2" BSP M (zunanji navoj)
- moč 65 W, 230 V / 50 Hz
- premer komore 160 mm, skupna dolžina 940 mm, razmik priključkov 690 mm
- največji tlak 7 bar, delovna temperatura od +5 do +40 °C
- krmilna omarica z elektroniko, števcem obratovalnih ur, stikalom in LED signalizacijo napake, stopnja zaščite IP43
Vzdrževanje in vgradnja
- kvarčno cev čistite vsake 3–6 mesecev z alkoholom ali posebnim čistilom in jo po 24 mesecih zamenjajte
- O-tesnilo menjajte vsakih 9–12 mesecev
- UV sijalko zamenjajte po 10 000 obratovalnih urah (približno 9–12 mesecev)
Sterilizator vgradite na lahko dostopno mesto, kjer ne zmrzuje (najmanj +5 °C). Montažo in električno priključitev sme izvesti le strokovno usposobljena oseba. UV sevanje škoduje koži in očem, kvarčno steklo pa je krhko – z njim ravnajte previdno.
Tehnični podatki
| Koda | IVA.HA365 |
| Znamka | IVAR |
| Tip | IVAR.UV LIGHT KIT MAX |
| Model | FC-20 |
| Največji pretok | 4536 l/h |
| Priključek | 1 1/2" BSP M (6/4") |
| Moč | 65 W |
| Napajanje | 230 V / 50 Hz |
| Valovna dolžina | 254 nm (UVC) |
| Doza obsevanja | > 40 mJ/cm² |
| Največji tlak | 7 bar |
| Material komore | AISI 304 |
| Mere | Ø 160 mm, dolžina 940 mm |
| Življenjska doba sijalke | pribl. 10 000 h |
| Nadomestni deli | sijalka HA510, kvarčna cev HA540, O-tesnilo HA552 |
Pogosta vprašanja
Kolikšen pretok zmore UV sterilizator IVA.HA365?
Model FC-20 je dimenzioniran za največ 4536 l/h pri priključku 6/4". Za večji pretok, do 10 200 l/h, je v seriji na voljo model IVA.HA380 s priključkom 2".
Kako pogosto je treba menjati UV sijalko?
Po približno 10 000 obratovalnih urah, kar je okoli 9–12 mesecev. Nato učinkovitost germicidnega sevanja strmo pade, čeprav sijalka še sveti.
Kako skrbeti za kvarčno cev?
Čistite jo vsake 3–6 mesecev, odvisno od kakovosti vode, z alkoholom ali posebnim sredstvom in jo po 24 mesecih zamenjajte. O-tesnilo se menja vsakih 9–12 mesecev.
Dodatni parametri
| Kategorija: | UV svetilke in reverzne osmoze |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | UV svetilka |
| Koda: | IVA.HA365 |
| Znamka: | IVAR |
| Tip: | IVAR.UV LIGHT KIT MAX |
| Model: | FC-20 |
| Največji pretok: | 4536 l/h |
| Priključek: | 1 1/2" BSP M (6/4") |
| Moč: | 65 W |
| Napajanje: | 230 V / 50 Hz |
| Valovna dolžina: | 254 nm (UVC) |
| Doza obsevanja: | > 40 mJ/cm² |
| Največji tlak: | 7 bar |
| Material komore: | AISI 304 |
| Mere: | Ø 160 mm, dolžina 940 mm |
| Življenjska doba sijalke: | pribl. 10 000 h |
| Nadomestni deli: | sijalka HA510, kvarčna cev HA540, O-tesnilo HA552 |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.