Sistemska toplotnoizolacijska plošča IVAR.ST 20 AL za suhi sistem – 20 mm, 1200 × 600 mm (0,72 m²)
Koda: ST20ALPodroben opis izdelka
IVAR.ST 20 AL plošča (koda ST20AL) je sistemska toplotnoizolacijska plošča za suhi sistem talnega ogrevanja. Primerna je povsod tam, kjer ni mogoče ali primerno uporabiti betonskega estriha ali samorazlivne mešanice – pri prenovah, kjer bi estrih prekomerno obremenil konstrukcije, v lesenih gradnjah, občutljivih na vlago, ali pri nizki razpoložljivi konstrukcijski višini.
Lastnosti plošče
- Debelina 20 mm, format in uporabna mera 1200 × 600 mm = 0,72 m²
- za cevi PE-RT 16 × 2 mm s razmakom polaganja 150 mm
- površinska aluminijasta plast debeline 100–200 µm razporeja toploto po površini
- izolacija EPS 400: toplotna prevodnost λD 0,0314 W/mK, toplotna upornost RD 0,65 m²K/W
- razred reakcije na ogenj E, v skladu z DIN EN 13163
Sestava talne obloge
Na ploščo se polagajo tlakovne mavčno vlaknene plošče – proizvajalec priporoča tipe Fermacell ali Knauf debeline 25 mm, na katere je mogoče lepiti keramične ploščice. Za laminatno kritino zadošča mavčno vlaknena plošča 12,5 mm. Sistem s to ploščo omogoča pri uporabi mavčno vlaknatih plošč skupno konstrukcijsko višino 45 mm (brez končne kritine). Na stabilni in nosilni podlagi se lahko keramične ploščice položijo tudi neposredno na ploščo. Za večjo toplotno odpornost je na voljo plošča IVAR.ST 30 AL (koda ST30AL).
Tehnični parametri
| Koda | ST20AL |
| Blagovna znamka | IVAR |
| Vrsta | IVAR.ST 20 AL |
| Sistem | suha talno ogrevanje |
| Debelina | 20 mm |
| Format | 1200 × 600 mm |
| Uporabna površina | 0,72 m² |
| Razmak med polaganjem | 150 mm |
| Cevi | PE-RT 16 × 2 mm |
| Izolacija | EPS 400 |
| Toplotna prevodnost λD | 0,0314 W/mK |
| Toplotni upor RD | 0,65 m²K/W |
| Debelina AL plasti | 100–200 µm |
| Trdnost proti ognju | E |
Pogosta vprašanja
Potrebujem pri tej plošči betonski estrih?
Ne. Plošča je namenjena za suh sistem, v katerem estrih nadomeščajo talne mavčno vlaknene plošče – proizvajalec priporoča Fermacell ali Knauf debeline 25 mm.
Katere cevi se položijo na ploščo?
PE-RT cevi z zunanjim premerom 16 × 2 mm s polagalno razdaljo 150 mm.
Kakšna je razlika med ploščama ST20AL in ST30AL?
ST20AL ima debelino 20 mm, izolacijo EPS 400 in toplotno odpornost 0,65 m²K/W. ST30AL ima debelino 30 mm, EPS 300 in toplotno odpornost 0,95 m²K/W.
Dodatni parametri
| Kategorija: | IVAR IZOLACIJA |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | ST20AL |
| Znamka: | IVAR |
| Tip: | IVAR.ST 20 AL |
| Sistem: | suhi sistem talnega ogrevanja |
| Debelina: | 20 mm |
| Format: | 1200 × 600 mm |
| Uporabna površina: | 0,72 m² |
| Razmik polaganja: | 150 mm |
| Cevi: | PE-RT 16 × 2 mm |
| Izolacija: | EPS 400 |
| Toplotna prevodnost λD: | 0,0314 W/mK |
| Toplotna upornost RD: | 0,65 m²K/W |
| Debelina AL plasti: | 100–200 µm |
| Razred odziva na ogenj: | E |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.