Sistemska izolacijska rola IVAR.TAKR z laminirano ALU PET folijo – debelina 30 mm, rola 10 m² IVAR.TAKR
Koda: TAKR1Sorodni izdelki
Podroben opis izdelka
Rola IVAR.TAKR s kodo TAKR1 tvori toplotnoizolacijski sloj pod toplovodnim talnim ogrevanjem, zalitim z betonskim estrihom. Jedro je iz ekspandiranega polistirena EPS 100 s skupno debelino 30 mm, na površini pa ima laminirano ALU PET folijo, odporno proti trganju. Folija odbija toploto proti estrihu, natisnjeni raster 50 × 50 mm pa olajša polaganje cevi na natančno določenih razmikih.
Polaganje
- razmik cevi 50, 100, 150, 200 ali 250 mm
- za cevi z zunanjim premerom 16, 17 in 18 mm
- format role 10 000 × 1 000 mm, uporabna površina 10 m²
- samolepilni trak na eni strani folije poveže sosednja pasova tako, da v stik ne vdira estrih niti zamesna voda
Tehnični podatki
- toplotna prevodnost λD 0,038 W/mK, toplotna upornost R 0,75 m²K/W
- največja obremenitev 20 kN/m² (2 000 kg/m²), upogibna trdnost ≥ 150 kPa po EN 12089
- temperaturna obstojnost kratkotrajno 95 °C, dolgotrajno 80 – 85 °C
- odziv na ogenj razred E po EN 13501-1, klasifikacija EPS-100 po EN 13163
Družina IVAR.TAKR vključuje tudi izvedbo TAKR1DB, katere izolacijski sloj duši udarni zvok za 27 dB.
Tehnični podatki
| Koda | TAKR1 |
| Proizvajalec | IVAR |
| Tip | IVAR.TAKR |
| Vrsta | sistemska izolacijska rola z laminirano ALU PET folijo |
| Izolacijski material | EPS 100 |
| Skupna debelina | 30 mm |
| Format role | 10 000 × 1 000 mm |
| Uporabna površina | 10 m² |
| Razmik polaganja | 50 – 250 mm (po 50 mm) |
| Zunanji premer cevi | 16, 17 in 18 mm |
| Toplotna prevodnost λD | 0,038 W/mK |
| Toplotna upornost R | 0,75 m²K/W |
| Največja obremenitev | 20 kN/m² (2 000 kg/m²) |
| Temperaturna obstojnost | kratkotrajno 95 °C, dolgotrajno 80 – 85 °C |
| Odziv na ogenj | razred E (EN 13501-1) |
Pogosta vprašanja
Za katere cevi je rola primerna?
Za cevi talnega ogrevanja z zunanjim premerom 16, 17 in 18 mm, položene na razmikih od 50 do 250 mm.
Kako se pasovi role med seboj povežejo?
Na eni strani folije je samolepilni trak, s katerim se prelepi sosednji pas. Stik preprečuje, da bi vanj vdiral betonski estrih in zamesna voda.
Ali ima rola TAKR1 tudi zvočno izolacijo udarnega zvoka?
Ne, TAKR1 je toplotnoizolacijska rola brez dušenja udarnega zvoka. Izvedba z dušenjem 27 dB ima kodo TAKR1DB.
Kolikšno površino pokrije ena rola?
Ena rola meri 10 000 × 1 000 mm, kar pomeni 10 m² uporabne površine.
Dodatni parametri
| Kategorija: | dodatna oprema |
|---|---|
| Garancija: | 24 |
| Koda: | TAKR1 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.TAKR |
| Vrsta: | sistemska izolacijska rola z laminirano ALU PET folijo |
| Izolacijski material: | EPS 100 |
| Skupna debelina: | 30 mm |
| Format role: | 10 000 × 1 000 mm |
| Uporabna površina: | 10 m² |
| Razmik polaganja: | 50 – 250 mm (po 50 mm) |
| Zunanji premer cevi: | 16, 17 in 18 mm |
| Toplotna prevodnost λD: | 0,038 W/mK |
| Toplotna upornost R: | 0,75 m²K/W |
| Največja obremenitev: | 20 kN/m² (2 000 kg/m²) |
| Temperaturna obstojnost: | kratkotrajno 95 °C, dolgotrajno 80 – 85 °C |
| Odziv na ogenj: | razred E (EN 13501-1) |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.