Servomotor IVAR.SRVM ECOMIX za kotlovske module DN 25 / DN 32 – 230 V, 3-točkovni, 120 s, 5 Nm – AKCIJA IVAR.SRVM ECOMIX
Koda: IVA20317291Sorodni izdelki
Podroben opis izdelka
Servomotor IVAR.SRVM ECOMIX s kodo IVA20317291 vrti vreteno tripotnega mešalnega ventila v kotlovskih modulih IVAR dimenzij DN 25 in DN 32 in nastavlja njegov položaj po ukazih regulatorja ogrevanja. Ta izvedba se priključi na 230 V ~ 50 Hz in krmili s 3-točkovnim signalom.
Glavne lastnosti
- kot zasuka 90°, navor 5 Nm, čas premika 120 s
- poraba 2,5 – 4 VA, stopnja zaščite IP 42, zaščitni razred II
- kompaktno ohišje iz PC termoplasta dimenzij 95 × 80 × 92 mm – vgradni položaj se izbira v korakih po 90°, pogon pa se prilega večini toplotnoizolacijskih lupin
- ob dosegu obratovalnih mej se pogon električno odklopi in ostane brez napetosti
- samodejno delovanje z možnostjo preklopa na ročno upravljanje
- LED prikaz stanja delovanja
Montaža in priključitev
Na vreteno mešalnega ventila se namesti adapter, nanj pa se servomotor nasadi ob pritisnjeni montažni tipki na zadnji strani. Vgradnjo in električno priključitev sme izvesti le oseba z ustrezno elektrotehnično usposobljenostjo; vsak napajalni vodnik mora biti priključen prek ločilne naprave z razmikom odprtih kontaktov najmanj 3 mm.
Za zvezno krmiljenje je v isti seriji na voljo izvedba IVA20317294 z napajanjem 24 V in signalom 0–10 / 2–10 V.
Tehnični podatki
| Koda | IVA20317291 |
| Proizvajalec | IVAR |
| Tip | IVAR.SRVM ECOMIX |
| Uporaba | kotlovski moduli s tripotnim mešalnim ventilom DN 25 / DN 32 |
| Napajalna napetost | 230 V ~ 50 Hz |
| Krmilni signal | 3-točkovni |
| Navor | 5 Nm |
| Kot zasuka | 90° |
| Čas premika | 120 s |
| Poraba | 2,5 – 4 VA |
| Stopnja zaščite | IP 42 (EN 60529) |
| Zaščitni razred | II (EN 60730-1) |
| Temperatura okolice | do 50 °C |
| Material ohišja | PC termoplast |
| Dimenzije | 95 × 80 × 92 mm |
Pogosta vprašanja
Za katere kotlovske module je servomotor namenjen?
Za kotlovske module IVAR s tripotnim mešalnim ventilom dimenzij DN 25 in DN 32.
Kateri krmilni signal uporablja ta izvedba?
Izvedba IVA20317291 se napaja z 230 V in krmili s 3-točkovnim signalom. Če regulator oddaja signal 0–10 V ali 2–10 V, izberite izvedbo za 24 V IVA20317294.
Ali je ventil mogoče nastaviti tudi ročno?
Da, servomotor je mogoče preklopiti iz samodejnega načina v ročno upravljanje, ventil pa nato nastavite z ročnim upravljalnim elementom.
Kdo sme priključiti servomotor?
Montažo in električno priključitev mora izvesti strokovno usposobljena oseba z elektrotehnično izobrazbo, skladno z veljavnimi standardi.
Dodatni parametri
| Kategorija: | servopogoni za ventile MIX |
|---|---|
| Garancija: | 24 |
| Koda: | IVA20317291 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.SRVM ECOMIX |
| Uporaba: | kotlovski moduli s tripotnim mešalnim ventilom DN 25 / DN 32 |
| Napajalna napetost: | 230 V ~ 50 Hz |
| Krmilni signal: | 3-točkovni |
| Navor: | 5 Nm |
| Kot zasuka: | 90° |
| Čas premika: | 120 s |
| Poraba: | 2,5 – 4 VA |
| Stopnja zaščite: | IP 42 (EN 60529) |
| Zaščitni razred: | II (EN 60730-1) |
| Temperatura okolice: | do 50 °C |
| Material ohišja: | PC termoplast |
| Dimenzije: | 95 × 80 × 92 mm |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.