LCD regulacija IVAR.LCD20 za konvektorje ECI – zaslon 3,5", vgrajeno tipalo temperature – AKCIJA IVAR.LCD20
Koda: I07916842Sorodni izdelki
Podroben opis izdelka
IVAR.LCD20 (šifra I07916842) je stenski upravljalnik za stropne kasetne konvektorje s ventilatorjem ECI v sistemih ogrevanja in hlajenja. Na regulaciji se nastavijo vsi obratovalni parametri in prikažejo stanja vhodov in izhodov glavnega regulatorja – kartice Power IdroLAN v napravi.
Lastnosti
- osvetljen grafični LCD zaslon 3,5" in tipke na dotik
- upravljanje temperature, hitrosti ventilatorja in načina ogrevanje/hlajenje
- vgrajeno NTC tipalo prostorske temperature
- zvočna potrditev prejetih ukazov
- možnost krmiljenja več konvektorjev, ki delujejo v enakih pogojih
Priključitev in montaža
Regulacija se s kartico Power IdroLAN poveže z izoliranim 4-žilnim kablom, po katerem dobiva tako napajanje 12 V DC kot podatke. Namesti se na steno na plastično podnožje, približno 1,5 m nad tlemi. Za natančno regulacijo je treba nastaviti korekcijo prostorske temperature (parametra P24 in P25). Vgradnjo mora izvesti strokovnjak z elektrotehnično usposobljenostjo.
Tehnični podatki
| Šifra | I07916842 |
| Proizvajalec | IVAR |
| Tip | IVAR.LCD20 |
| Namen | konvektorji ECI |
| Zaslon | LCD 3,5", osvetljen |
| Tipalo temperature | vgrajeno NTC |
| Napajanje | 12 V DC s kartice Power IdroLAN |
| Poraba moči | 0,192 W |
| Stopnja zaščite | IP 30 po vgradnji |
| Obratovalni pogoji | 0–50 °C, 10–90 % rel. vlage brez kondenzacije |
| Temperatura skladiščenja | od -10 do +60 °C |
| Masa | 70 g |
| Montaža | na steno |
Pogosta vprašanja
Ali regulacija potrebuje ločeno napajanje?
Ne. Regulacija se napaja z 12 V DC s kartice Power IdroLAN v konvektorju ECI po istem 4-žilnem kablu, po katerem poteka komunikacija.
Ali ima regulacija lastno tipalo temperature?
Da, vsebuje vgrajeno NTC prostorsko tipalo. Da bi pravilno merila, je treba ob zagonu nastaviti korekcijo prostorske temperature v parametrih P24 in P25.
Kam namestiti regulacijo?
Na steno približno 1,5 m nad tlemi, stran od oken, radiatorjev in drugih virov toplote, ki bi popačili merjenje temperature.
Ali lahko ena regulacija krmili več konvektorjev?
Da, regulacija lahko krmili več konvektorjev ECI, če delujejo v enakih pogojih. Za centralno krmiljenje do 16 enot je namenjena regulacija IVAR.MANAGER.
Dodatni parametri
| Kategorija: | Dodatna oprema za ventilatorski konvektor |
|---|---|
| Garancija: | 24 |
| Teža: | 0.07 kg |
| Šifra: | I07916842 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.LCD20 |
| Namen: | konvektorji ECI |
| Zaslon: | LCD 3,5", osvetljen |
| Tipalo temperature: | vgrajeno NTC |
| Napajanje: | 12 V DC s kartice Power IdroLAN |
| Poraba moči: | 0,192 W |
| Stopnja zaščite: | IP 30 po vgradnji |
| Obratovalni pogoji: | 0–50 °C, 10–90 % rel. vlage brez kondenzacije |
| Temperatura skladiščenja: | od -10 do +60 °C |
| Masa: | 70 g |
| Montaža: | na steno |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.