Reducirni nastavek za stiskanje PPSU 50 × 32 mm, IVAR.VR PPSU (82850170)
Koda: 82850170Podroben opis izdelka
Koda 82850170 je reducirni nastavek 50 x 32 mm iz sistema IVAR.PRESS. Večji konec meri 50 mm, manjši 32 mm; vsakega se stisne na cev ustreznega premera.
- Uporaba: prehod med dvema premeroma cevi ALPEX, TURATEC in PEX v ogrevanju in v pitni vodi.
- Delovanje: PN 10, temperatura od +3 do +95 °C.
- Material: telo iz PPSU, tesnilo EPDM, stiskalna objemka iz nerjavnega jekla AISI 304 in zaporni obroč iz polikarbonata.
- Teža: 127 g.
Fitingi imajo higienski certifikat za pitno vodo. Spoji so lahko v tlaku, jašku ali pod ometom, pod tlak pa jih je mogoče dati takoj po stiskanju; odprt plamen ni potreben. Stiskajte po navodilih proizvajalca sistema.
Tehnični podatki
| Koda | 82850170 |
| Proizvajalec | IVAR |
| Tip | IVAR.VR PPSU |
| Dimenzija | 50 × 32 mm |
| Maks. delovni tlak | PN 10 |
| Temperaturno območje | +3 … +95 °C |
| Material telesa | PPSU |
| Teža | 127 g |
Pogosta vprašanja
Kaj povezuje redukcija 50 x 32 mm?
Dve cevi ALPEX, TURATEC ali PEX s premeroma 50 mm in 32 mm, ki ju stisnemo radialno.
Za kakšne delovne pogoje je fiting namenjen in ga lahko uporabim za pitno vodo?
Dimenzioniran je za PN 10 in temperature od +3 do +95 °C. Ima higienski certifikat za pitno vodo, zato ga je mogoče uporabiti tudi v napeljavah pitne vode.
Dodatni parametri
| Kategorija: | redukcijske spojke press - PPSU |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.127 kg |
| Koda: | 82850170 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.VR PPSU |
| Dimenzija: | 50 × 32 mm |
| Maks. delovni tlak: | PN 10 |
| Temperaturno območje: | +3 … +95 °C |
| Material telesa: | PPSU |
| Teža: | 127 g |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
