Redukcijski komplet DN 50 – DN 32 IVAR.LO-RG 50-32 za priklop kotlovskega modula na razdelilnik, 2 kosa IVAR.LO-RG 50-32
Koda: IVA49201112Sorodni izdelki
Podroben opis izdelka
Redukcijski komplet IVAR.LO-RG 50-32 (koda IVA49201112) se uporabi, kadar ima horizontalni razdelilnik izhode DN 50, kotlovski modul, ki ga želite namestiti nanj, pa ima priključek DN 32. Redukciji izravnata razliko v premeru na obeh priključkih modula, zato dodatni prehodni kosi niso potrebni.
Vsebina kompleta
Kako izbrati pravo velikost
Prva številka v oznaki pove izhod razdelilnika (DN 50), druga priključek kotlovskega modula (DN 32). Za razdelilnike z izhodi DN 50 serija IVAR.LO-RG ponuja naslednje kombinacije: IVAR.LO-RG 50-32 in IVAR.LO-RG 50-40.
Kotlovski modul in razdelilnik nista del dobave. Montažo zaupajte usposobljenemu monterju ogrevanja.
Tehnični podatki
| Koda | IVA49201112 |
| Proizvajalec | IVAR |
| Tip | IVAR.LO-RG 50-32 |
| Vrsta | redukcijski komplet |
| Število redukcij v kompletu | 2 kosa |
| Izhod razdelilnika | DN 50 |
| Priključek kotlovskega modula | DN 32 |
| Material | lakirano jeklo |
| Toplotna izolacija | EPP |
| Del kompleta | toplotna izolacija, vijaki, tesnila |
Pogosta vprašanja
Čemu je namenjen redukcijski komplet IVAR.LO-RG 50-32?
Poveže kotlovski modul s priključkom DN 32 s horizontalnim razdelilnikom, ki ima izhode DN 50.
Sta izolacija in tesnila priložena?
Da. Poleg dveh redukcij iz lakiranega jekla komplet vsebuje toplotno izolacijo iz EPP, vijake in tesnila. Kotlovski modul in razdelilnik se naročita posebej.
Kako vem, kateri redukcijski komplet potrebujem?
Odločilni sta dve meri: izhod razdelilnika in priključek kotlovskega modula. Komplet IVAR.LO-RG 50-32 je za izhod DN 50 in modul DN 32.
Dodatni parametri
| Kategorija: | redukcijski kompleti in dodatna oprema PAW |
|---|---|
| Garancija: | 24 |
| Koda: | IVA49201112 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.LO-RG 50-32 |
| Vrsta: | redukcijski komplet |
| Število redukcij v kompletu: | 2 kosa |
| Izhod razdelilnika: | DN 50 |
| Priključek kotlovskega modula: | DN 32 |
| Material: | lakirano jeklo |
| Toplotna izolacija: | EPP |
| Del kompleta: | toplotna izolacija, vijaki, tesnila |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.