Razdelilnik hladne in tople vode TECOFIX s 4 izhodi, DN 10, FASTEC Quick F 13 – IVAR.TECOFIX CK2 – AKCIJA IVAR.TECOFIX CK2
Koda: CK024F10100Sorodni izdelki
Podroben opis izdelka
Razdelilnik hladne in tople vode TECOFIX s 4 izhodi, koda CK024F10100 (tip IVAR.TECOFIX CK2), razdeli dovod vode v ločene veje, na primer do posameznih odjemnih mest. Nazivni premer je DN 10, cevi pa se priključijo s sistemom FASTEC Quick s priključno mero F 13.
Lastnosti
- izvedba s 4 izhodi za priključitev vej
- nazivni tlak PN 16, najvišja temperatura +95 °C
- za cevi ALPEX in PEX
- priključna mera FASTEC Quick F 13
- material medenina, O-tesnilo iz EPDM
- izhodi brez zapornih ventilov
Montaža in pribor sistema TECOFIX
Za montažo razdelilnikov TECOFIX so na voljo montažna plošča TXA01 (240 x 80 mm) za pritrditev na steno, montažna plošča TXA02 s podometno omarico (310 x 210 x 85 mm) ter montažne objemke TECOFIX TX001 in TX002. Naročijo se posebej.
Če želite posamezne veje zapirati, izberite razdelilnik IVAR.TECOFIX CK3 s 4 izhodi in krogelnimi ventili (koda CK034F10100). Priključitev na vodovodno napeljavo priporočamo prepustiti inštalaterju.
Tehnični podatki
| Koda | CK024F10100 |
| Proizvajalec | IVAR |
| Tip | IVAR.TECOFIX CK2 |
| Vrsta izdelka | razdelilnik hladne in tople vode |
| Sistem | TECOFIX |
| Število izhodov | 4 |
| Ventili na izhodih | brez ventilov |
| Nazivni premer | DN 10 |
| Nazivni tlak | PN 16 |
| Najvišja temperatura | +95 °C |
| Priključek | FASTEC Quick, F 13 |
| Primerne cevi | ALPEX, PEX |
| Material | medenina, O-tesnilo EPDM |
Pogosta vprašanja
Za katere cevi je namenjen razdelilnik TECOFIX s 4 izhodi?
Za cevi ALPEX in PEX. Priključi se s sistemom FASTEC Quick s priključno mero F 13.
Ali je razdelilnik primeren tudi za toplo vodo?
Da, namenjen je hladni in topli vodi. Nazivni tlak je PN 16, najvišja temperatura pa +95 °C.
Ali je mogoče posamezne izhode zapreti?
Tip IVAR.TECOFIX CK2 na izhodih nima ventilov. Za ločeno zapiranje vej je namenjen razdelilnik IVAR.TECOFIX CK3 s 4 izhodi in krogelnimi ventili (koda CK034F10100).
Kaj potrebujem za pritrditev razdelilnika?
Za razdelilnike TECOFIX so na voljo montažna plošča TXA01 za steno, plošča TXA02 s podometno omarico ter montažne objemke TECOFIX TX001 in TX002. Naročijo se posebej.
Dodatni parametri
| Kategorija: | razdelilniki hladne in tople vode |
|---|---|
| Garancija: | 24 |
| Koda: | CK024F10100 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.TECOFIX CK2 |
| Vrsta izdelka: | razdelilnik hladne in tople vode |
| Sistem: | TECOFIX |
| Število izhodov: | 4 |
| Ventili na izhodih: | brez ventilov |
| Nazivni premer: | DN 10 |
| Nazivni tlak: | PN 16 |
| Najvišja temperatura: | +95 °C |
| Priključek: | FASTEC Quick, F 13 |
| Primerne cevi: | ALPEX, PEX |
| Material: | medenina, O-tesnilo EPDM |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.