Fleksibilna cev IVAR.TER-HO za priključitev toplotne črpalke MEGA – DN 35 mm, 620 mm IVAR.TER-HO
Koda: IHP086U6001Sorodni izdelki
Podroben opis izdelka
Fleksibilna cev IVAR.TER-HO (šifra IHP086U6001) je namenjena priključitvi toplotne črpalke serije MEGA na cevovod ogrevalnega sistema ali po potrebi na razvod za pripravo sanitarne tople vode. Uporablja se na topli strani toplotne črpalke. Njena glavna naloga je preprečevanje prenosa vibracij: kompresor kot vir tresljajev loči od cevovoda in gradbenih konstrukcij, ki bi vibracije širile naprej.
Izvedba
- nazivni premer DN 35 mm, dolžina 620 mm
- na eni strani kompresijski spoj z obročkom (olivo) za bakreno cev 35 mm
- na drugi strani zunanji navoj R32
- notranja plast iz gume, zunanji plašč iz jekla, priključki iz medenine
- delovna temperatura od 0 do 65 °C
Navodila za montažo
Cevi pri vgradnji ne zvijajte, pri zategovanju navojnih spojev pa nasprotno stran pridržite z drugim ključem. Cev ne sme biti napeta niti povsem ravna – konca namestite tako, da cev tvori rahel lok in se v pregibu ne prelomi. Pri spojih uporabite toga cevna kolena, da cev v pregibih ni po nepotrebnem obremenjena. V seriji IVAR.TER-HO za MEGA sta na voljo tudi izvedbi DN 28 mm/600 mm in DN 42 mm/820 mm.
Tehnični podatki
| Šifra | IHP086U6001 |
| Znamka | IVAR |
| Tip | IVAR.TER-HO |
| Namen | toplotne črpalke serije MEGA |
| Stran priključitve | ogrevalni sistem (topla stran) |
| Nazivni premer | DN 35 mm |
| Dolžina | 620 mm |
| Priključek 1 | kompresijski spoj z obročkom (olivo) za Cu 35 mm |
| Priključek 2 | zunanji navoj R32 |
| Notranja plast | guma |
| Zunanji plašč | jeklo |
| Material priključkov | medenina |
| Delovna temperatura | 0 – 65 °C |
Pogosta vprašanja
Za katere toplotne črpalke je namenjena cev IHP086U6001?
Gibka cev IVAR.TER-HO je namenjena priključitvi toplotnih črpalk serije MEGA na ogrevalni sistem oziroma na cevovod za pripravo tople vode. Montira se na toplo stran toplotne črpalke.
Kakšne priključke ima cev na koncih?
Na enem koncu ima stisni spoj z obročkom (olivo) za bakreno cev 35 mm, na drugem zunanji navoj R32. Nazivni premer cevi je DN 35 mm.
Kako cev pravilno namestiti?
Cevi pri montaži ne zvijajte, navojni spoj pa privijte tako, da drugo stran pridržite z drugim ključem. Pustite jo v rahlem loku, ne napeto in ne povsem ravno, spremembe smeri pa izvedite s togimi koleni.
Dodatni parametri
| Kategorija: | dodatna oprema za TČ serije IVAR.HP MEGA |
|---|---|
| Garancija: | 2 leti |
| Šifra: | IHP086U6001 |
| Znamka: | IVAR |
| Tip: | IVAR.TER-HO |
| Namen: | toplotne črpalke serije MEGA |
| Stran priključitve: | ogrevalni sistem (topla stran) |
| Nazivni premer: | DN 35 mm |
| Dolžina: | 620 mm |
| Priključek 1: | kompresijski spoj z obročkom (olivo) za Cu 35 mm |
| Priključek 2: | zunanji navoj R32 |
| Notranja plast: | guma |
| Zunanji plašč: | jeklo |
| Material priključkov: | medenina |
| Delovna temperatura: | 0 – 65 °C |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.