Prirobnični zaporni in uravnalni ventil EKOFLUX S IVAR BRA.EKOFLUX S DN 50 (EKOFLUX.S050) BRA.EKOFLUX S
Koda: EKOFLUX.S050Sorodni izdelki
Podroben opis izdelka
Ventil EKOFLUX.S050 iz serije BRA.EKOFLUX S znamke IVAR uravnoteži pretok v glavnih krogih ali posameznih vejah ogrevalnih in klimatskih sistemov. Uravnoteženje odpravi neenakomerno oskrbo porabnikov, ki lahko povzroča hrup in obremenjuje komponente, ter tako izboljša udobje in izrabo energije. Poleg zapiranja in merjenja omogoča zvezna prednastavitev upravljanje padca tlaka in pretoka.
Tehnični podatki
- Nazivna velikost DN: 50
- Vrednost Kvs: 55,6 m³/h
- Najv. tlak: 16 bar (PN 16)
- Temperatura medija: −10 °C … +120 °C
- Material ohišja: siva litina GJL 250
- Tesnilo: EPDM
- Površinska zaščita: epoksidni premaz RAL 5002
- Prirobnice: PN 16 (EN 1092-1)
- Medij: voda in zmesi vode in glikola do 50 %
Vgradi se lahko v dovod ali povratek. Primeren je za vodo in zmesi vode in glikola do 50 %, ne pa za paro, pline ali tekočine z olji in ogljikovodiki. Ventil lahko služi tudi kot vir tlaka za regulator EKOFLUX DPCV. Montažo prepustite strokovnemu podjetju.
Tehnični podatki
| Koda | EKOFLUX.S050 |
| Proizvajalec | IVAR |
| Tip | BRA.EKOFLUX S |
| Nazivna velikost DN | 50 |
| Vrednost Kvs | 55,6 m³/h |
| Najv. tlak | 16 bar (PN 16) |
| Temperatura medija | −10 °C … +120 °C |
| Material ohišja | siva litina GJL 250 |
| Tesnilo | EPDM |
| Površinska zaščita | epoksidni premaz RAL 5002 |
| Prirobnice | PN 16 (EN 1092-1) |
| Medij | voda in zmesi vode in glikola do 50 % |
Pogosta vprašanja
Kam se vgradi ventil EKOFLUX.S050?
Lahko gre v dovod ali povratek; proizvajalec strani vgradnje ne predpisuje.
Kateri medij sme teči skozi ventil?
Voda in zmesi vode in glikola do 50 % pri tlaku do 16 barov. Ventila ne uporabljajte s plini, paro, olji, ogljikovodiki ter nevarnimi, korozivnimi in abrazivnimi tekočinami.
Ali se ventil lahko uporablja z regulatorjem tlaka DPCV?
Da, omogoča prenos tlaka do regulatorja EKOFLUX DPCV.
Dodatni parametri
| Kategorija: | BRA.EKOFLUX S - zaporni in uravnotežni ventil |
|---|---|
| Garancija: | 24 |
| Koda: | EKOFLUX.S050 |
| Proizvajalec: | IVAR |
| Tip: | BRA.EKOFLUX S |
| Nazivna velikost DN: | 50 |
| Vrednost Kvs: | 55,6 m³/h |
| Najv. tlak: | 16 bar (PN 16) |
| Temperatura medija: | −10 °C … +120 °C |
| Material ohišja: | siva litina GJL 250 |
| Tesnilo: | EPDM |
| Površinska zaščita: | epoksidni premaz RAL 5002 |
| Prirobnice: | PN 16 (EN 1092-1) |
| Medij: | voda in zmesi vode in glikola do 50 % |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
