Eshop roka 2025 s vykurovacou technikou

Priključni holender za ravno tesnilo IVAR.IVN460 – nerjavno jeklo AISI 304, G2", 42 mm

Koda: IVN460.4220
Ni ocenjeno Podrobnosti o ocenjevanju
89,30 € –20 %
Pripojovacie šróbenie na ploché tesnenie IVAR.IVN460 – nerez AISI 304, G2", 42 mm
89,30 € –20 % 71,44 € / kos 58,08 € brez DDV Cena mere:
Mednarodna dostava
Po naročilu (1-2 tedna)

Podrobne informacije

Podroben opis izdelka

Priključni holender za ravno tesnilo IVAR.IVN460 je fiting za stiskanje iz nerjavnega jekla AISI 304 za cev premera 42 mm. Priključek: konec za stiskanje 42 mm, matica G2" za ravno tesnilo.

Uporaba

Uporaba: zaprti ogrevalni in hladilni krogi, sončni sistemi, stisnjen zrak in podtlačni sistemi, inertni in tehnični plini, tehnične tekočine, industrijske aplikacije, odpadna in deževnica. Sistem iz nerjavnega jekla AISI 304 ni primeren za pitno vodo.

Mere in priključek

  • Premer cevi: 42 mm
  • konec za stiskanje 42 mm, matica G2" za ravno tesnilo
  • Mera L: 57 mm
  • Mera Z: 11 mm

Montaža

Za cev premera 42 mm se uporabljajo verižne čeljusti s profilom M z najmanj tremi segmenti. Cev odrežite pravokotno, odstranite ostre robove znotraj in zunaj, potisnite do konca in označite globino vstavljanja. O-obroč lahko navlažite samo z vodo, nikoli z oljem ali mastjo, spoj pa se stisne samo enkrat. Montažo prepustite strokovnemu podjetju in upoštevajte navodila proizvajalca sistema IVAR.PRESS.

Tehnični podatki

KodaIVN460.4220
ProizvajalecIVAR
TipIVAR.IVN460
Vrsta izdelkaPriključni holender za ravno tesnilo
Premer cevi42 mm
NavojG2"
Mera L57 mm
Mera Z11 mm
Materialnerjavno jeklo AISI 304 (1.4301), medenina
TesniloO-obroč EPDM
Najv. tlakPN 16
Temperatura-20 do +120 °C
Čeljusti za stiskanjeprofil M, verižne (najmanj 3 segmenti)

Pogosta vprašanja

Kakšne mere in priključek ima IVN460.4220?
Priključek: konec za stiskanje 42 mm, matica G2" za ravno tesnilo. Mere po tehničnem listu proizvajalca: L = 57 mm, Z = 11 mm.

Ali se IVN460.4220 lahko uporablja za pitno vodo?
Ne. Sistem iz nerjavnega jekla AISI 304 je namenjen ogrevanju, hlajenju in tehničnim razvodom, ne pa pitni vodi.

Katere čeljusti za stiskanje se uporabljajo za IVN460.4220?
Za cev premera 42 mm se uporabljajo verižne čeljusti s profilom M z najmanj tremi segmenti.

Dodatni parametri

Kategorija: IVAR.IVN60,IVN61,IVN62,IVN64 - priključni holandci
Garancija: 2 leti
Koda: IVN460.4220
Proizvajalec: IVAR
Tip: IVAR.IVN460
Vrsta izdelka: Priključni holender za ravno tesnilo
Premer cevi: 42 mm
Navoj: G2"
Mera L: 57 mm
Mera Z: 11 mm
Material: nerjavno jeklo AISI 304 (1.4301), medenina
Tesnilo: O-obroč EPDM
Najv. tlak: PN 16
Temperatura: -20 do +120 °C
Čeljusti za stiskanje: profil M, verižne (najmanj 3 segmenti)

Ocena izdelka

Bodite prvi, ki bo objavil članek k tej postavki!

Tega polja ne izpolnite

Kako bi ocenili ta izdelek? Izberite od 1 do 5 zvezdic, pri čemer je 1 najslabša in 5 najboljša ocena.

Razprava

Bodite prvi, ki bo objavil članek k tej postavki!

Tega polja ne izpolnite

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.