Priključni spoji IVAR.TER-PS za zunanjo enoto ATHENA STANDARD – 2× 1" NN × Cu 28 mm IVAR.TER-PS
Koda: IHP086U567ASSorodni izdelki
Podroben opis izdelka
Uporaba
Kompresijski spoji IVAR.TER-PS so namenjeni priklopu cevovoda ogrevalnega sistema in kroga tople vode na priključke, ki izstopajo iz ohišja toplotne črpalke. Ta komplet je namenjen zunanji enoti ATHENA STANDARD in vsebuje dva prehoda z notranjega navoja 1" na bakreno cev premera 28 mm.
Konstrukcija in material
- tridelni kompresijski spoj: telo, obroček (oliva) in matica
- telo iz medenine CW617N, matica iz medenine CW614N, obroček iz medenine CW603N
- navoj matice za cev Ø 28 mm: W1"3/8-14
- fitingi so skladni s standardom UNI EN 1254-2 za kompresijske spoje bakrenih cevi, navoji s standardom UNI EN ISO 10226-1
Obratovalne omejitve
Najvišja obratovalna temperatura je +120 °C, najnižja delovna temperatura −20 °C, najvišji delovni tlak pa 16 bar.
Za zunanjo in notranjo enoto ATHENA TOTAL serija ponuja ločen komplet IHP086U567AH z več prehodi in spojkami.
Tehnični podatki
| Koda | IHP086U567AS |
| Znamka | IVAR |
| Tip | IVAR.TER-PS |
| Vrsta izdelka | kompresijski priključni spoji (komplet) |
| Namen | zunanja enota toplotne črpalke ATHENA STANDARD |
| Vsebina kompleta | 2× prehod na bakreno cev 1" NN × 28 mm |
| Material telesa | medenina CW617N |
| Material matice | medenina CW614N |
| Material obročka | medenina CW603N |
| Najvišja obratovalna temperatura | +120 °C |
| Najnižja delovna temperatura | −20 °C |
| Najvišji delovni tlak | 16 bar |
Pogosta vprašanja
Kaj vsebuje komplet za ATHENA STANDARD?
Dva medeninasta kompresijska prehoda z notranjega navoja 1" na bakreno cev premera 28 mm.
Za kaj se spoji uporabljajo?
Povezujejo bakrene cevi ogrevalnega sistema in kroga tople vode s priključki, ki izstopajo iz ohišja toplotne črpalke. Spoj sestavljajo telo, obroček in matica.
Ali je ta komplet primeren tudi za ATHENA TOTAL?
Ne, za zunanjo in notranjo enoto ATHENA TOTAL je namenjen komplet IHP086U567AH, ki vsebuje več prehodov in spojke za bakrene cevi.
Do katerega tlaka in temperature jih je mogoče uporabiti?
Do najvišjega delovnega tlaka 16 bar in obratovalne temperature +120 °C; najnižja delovna temperatura je −20 °C.
Dodatni parametri
| Kategorija: | dodatna oprema za TČ serije IVAR.HP ATHENA |
|---|---|
| Garancija: | 24 |
| Koda: | IHP086U567AS |
| Znamka: | IVAR |
| Tip: | IVAR.TER-PS |
| Vrsta izdelka: | kompresijski priključni spoji (komplet) |
| Namen: | zunanja enota toplotne črpalke ATHENA STANDARD |
| Vsebina kompleta: | 2× prehod na bakreno cev 1" NN × 28 mm |
| Material telesa: | medenina CW617N |
| Material matice: | medenina CW614N |
| Material obročka: | medenina CW603N |
| Najvišja obratovalna temperatura: | +120 °C |
| Najnižja delovna temperatura: | −20 °C |
| Najvišji delovni tlak: | 16 bar |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.