PRESOVALNA PPSU PRIPONKA 40x32 IVAR.VR PPSU – stiskalna redukcija za cevi ALPEX
Koda: 82840170Podroben opis izdelka
Prehod med dvema dimenzijama cevi
Reducirana vstavka IVAR.VR PPSU 40x32 iz sistema IVAR.PRESS zmanjša dimenzijo cevi neposredno na trasi – na eni strani se vgradi cev Ø 40 mm, na drugi Ø 32 mm (dimenzije cevi 40 x 3,5 / 32 x 3,0 mm). Primerna je za večplastne cevi ALPEX in TURATEC ter cevi PEX v razdelilnih sistemih do radiatorjev, v talnem ogrevanju in sanitarnih inštalacijah; za stik s pitno vodo ima higiensko potrdilo.
Material in mere
- telo iz polifenilsulfona (PPSU), odporno proti koroziji in nastajanju oblog
- pritrdilne objemke iz nerjavnega jekla AISI 304, O-tesnila iz EPDM
- aretačni obroč iz polikarbonata z odprtinami za preverjanje vstavitve cevi
- gradbena dolžina L1 84 mm, Z1 10 mm, teža 91 g
Stiskanje in montaža
Spoj se stisne radialno s čeljustmi ustreznega premera (kontura Ø 40 mm: F, Ø 32 mm: B/F) samo s odobrenim stiskalnim orodjem po navodilu IVAR za spajanje cevi s fitingi IVAR.PRESS. Cev je potrebno odrezati pravokotno, kalibrirati in odstraniti ostre robove; vstavljanje lahko olajšate z vodo, ne uporabljajte olja ali drugih maziv. Spoj nastane brez odprtega plamena, lahko ga obremenjujete s tlakom takoj po stiskanju in ga lahko vgradite v tla, v jašku ali pod omet.
Tehnični parametri
| Koda | 82840170 |
| Proizvajalec | IVAR |
| Vrsta | IVAR.VR PPSU |
| Velikost | 40x32 mm |
| Cev | 40 x 3,5 / 32 x 3,0 mm (ALPEX, TURATEC, PEX) |
| Največji obratovalni tlak | PN 10 |
| Temperaturni razpon | +3 °C do +95 °C |
| Material telesa | PPSU (polifenilsulfon) |
| Lisovna objemka | nerjavna jekla AISI 304 |
| tesnilo | O-tesnilo EPDM |
| Stiskalni čeljusti | kontura Ø 40 mm: F, Ø 32 mm: B/F |
| Gradbena dolžina L1 | 84 mm |
| Teža | 91 g |
Pogosta vprašanja
Katere cevi poveže reducirni spojnik 40x32?
Cev s premerom 40 mm s cevjo s premerom 32 mm – večplastne ALPEX in TURATEC ali PEX v dimenzijah 40 x 3,5 / 32 x 3,0 mm. Kombiniranje sistema s cevmi in fitingi drugih proizvajalcev navodilo IVAR ne dopušča.
S kakšnimi čeljustmi se vtič stiska? IVAR odobri za to velikost čeljusti s konturo Ø 40 mm: F, Ø 32 mm: B/F. Stiskati je treba z napravo s seznama združljivosti v navodilu IVAR.PRESS, na primer REMS IVAR.MINI-PRESS ali NOVOPRESS IVAR.ACO.
Ali lahko spoj ostane vgrajen v steno ali tlaku?
Da, vgrajeni spoji IVAR.PRESS smejo biti nedostopni v tleh, jašku in pod ometom. Sistem mora biti zaščiten pred UV žarki in vremenskimi vplivi.
Ali se vstavek lahko ponovno uporabi po stiskanju?
Ne. Fiting, ki je bil že enkrat stisnjen, se po navodilih IVAR ne sme ponovno uporabiti.
Dodatni parametri
| Kategorija: | redukcijske spojke press - PPSU |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.091 kg |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | 82840170 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.VR PPSU |
| Dimenzija: | 40x32 mm |
| Cev: | 40 x 3,5 / 32 x 3,0 mm (ALPEX, TURATEC, PEX) |
| Najv. delovni tlak: | PN 10 |
| Temperaturno območje: | +3 °C do +95 °C |
| Material ohišja: | PPSU (polifenilsulfon) |
| Stiskalna puša: | nerjavno jeklo AISI 304 |
| Tesnjenje: | O-tesnilo EPDM |
| Stiskalne čeljusti: | profil Ø 40 mm: F, Ø 32 mm: B/F |
| Vgradna dolžina L1: | 84 mm |
| Masa: | 91 g |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.