Prehodka PRESS-PPSU IVAR.PZ PPSU 20 x 3/4" M za cevi ALPEX
Koda: 82820763Podroben opis izdelka
Prehodnica IVAR.PZ PPSU 20 x 3/4" M (koda 82820763) ima na eni strani stiskalni konec za cevi 20x2, na drugi pa zunanji navoj 3/4". Uporablja se za priključitev cevi ALPEX, TURATEC ali PEX na armature z notranjim navojem, na primer na krogelne ventile ali kotne ventile.
Lastnosti
- telo iz plastike PPSU, stiskalni objem iz nerjaveče jekla AISI 304, tesnilni obroč EPDM, zaklepni obroč iz polikarbonata
- največji obratovalni tlak PN 10, temperaturni razpon +3 do +95 °C
- higienski atest za pitno vodo
- konstrukcijska dolžina 57 mm, teža 22 g
- radialno stiskanje s čeljusti s konturo B ali F (glede na navodila tudi TH)
montaža
Pri privijanju navojne armature držite telo prehodke proti obračanju, drugače se lahko cev v stisnjenem spoju zavrti. Za tesnenje navoja navodilo IVAR priporoča teflonsko nit ali trak; pri konoplji s odobreno pasto pustite vrhove navojev vidne in se izogibajte prevelikemu navornemu momentu. Nezatesnjen spoj pri tlačnem preskusu v razponu od 1 do 6,5 bara ne tesni, zato se razkrije še pred prekrivanjem.
Tehnični parametri
| Koda | 82820763 |
| Proizvajalec | IVAR |
| Vrsta | IVAR.PZ PPSU |
| Vrsta | tesnilna prehodna spojka z zunanjim navojem |
| Velikost | 20 x 3/4" M |
| Luščenje | Ø 20 mm (ALPEX, TURATEC, PEX 20x2) |
| Zvitek | zunanja 3/4" |
| Gradbena dolžina L1 | 57 mm |
| Teža | 22 g |
| Največji obratovalni tlak | PN 10 |
| Temperaturni razpon | +3 do +95 °C |
| Stiskalni čeljusti | B, F (tudi TH) |
| Material | PPSU, objemka AISI 304, O-obroč EPDM, zaklepni obroč PC |
Pogosta vprašanja
Za kaj se uporablja spojka 20 x 3/4" M?
Poveže cev ALPEX, TURATEC ali PEX s premerom 20 mm na armaturo z notranjim navojem 3/4", na primer na krogelni ventil ali kotni ventil.
S čim utesniti navoj?
Navodilo IVAR priporoča teflonsko nit ali teflonsko trako. Pri konopju s odobreno pasto morajo ostati vidni vrhovi navoja – preveč konopja ali prevelik navor lahko poškoduje fiting.
Na kaj paziti pri privijanju armature?
Telo prehodke je treba pri privijanju navojne armature držati proti vrtenju, sicer se lahko cev v stisnjenem spoju zasuče.
S kakšnimi čeljustmi se vtična spojka stiska?
Radialno, s čeljustmi konture B ali F za premer 20 mm; navodilo dopušča tudi konturo TH. Cev pred vstavljanjem kalibrirajte in odstranite ostre robove ter preverite njeno lego v oknih vpetilnega obroča.
Dodatni parametri
| Kategorija: | ravni prehodi press n. zunanji |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.022 kg |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | 82820763 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.PZ PPSU |
| Vrsta: | stiskalni prehodni kos z zunanjim navojem |
| Dimenzija: | 20 x 3/4" M |
| Stiskalna stran: | Ø 20 mm (ALPEX, TURATEC, PEX 20x2) |
| Navoj: | zunanji 3/4" |
| Vgradna dolžina L1: | 57 mm |
| Masa: | 22 g |
| Največji delovni tlak: | PN 10 |
| Temperaturno območje: | +3 do +95 °C |
| Stiskalne čeljusti: | B, F (tudi TH) |
| Material: | PPSU, tulec AISI 304, O-tesnilo EPDM, obroč PC |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.