Prehod s notranjim navojem IVAR.IVN480 22 mm × Rp1", stiskanje, nerjavno jeklo AISI 304
Koda: IVN480.2210Podroben opis izdelka
Prehod IVAR.IVN480 22 mm × Rp1" je stiskalni fiting iz nerjavečega jekla 1.4301 (AISI 304), ki povezuje stiskani razdelilnik s navojnim priključkom. En konec ima stiskalni del za cev dimenzije 22 mm, drugi pa notranji cevni navoj Rp1" (izvedba PRESS × ZÁVIT). Spoj na stiskani strani tesni O-obroč iz EPDM.
Področja uporabe
- zaprte ogrevalne in hladilne sisteme
- sončni sistemi
- stisnjen zrak in podtlačni cevovodi
- inertni in tehnični plini
- tehnične in obratovalne tekočine, industrijske aplikacije
- odpadne in deževne vode
Pitna voda med navedenimi nameni uporabe ni.
Delovna vrednost
- tlačna stopnja PN 16
- delovna temperatura -20 °C do +85 °C, maksimalno +120 °C
Kontrola tesnenja
Dokler stiskalno grlo ni stisnjeno, spoj namerno ne tesni, tako da se morebitno izpust stiskanja že pojavi pri tlačnem preskusu. Poleg tega bo končni spoj označil indikator stiskanja. Obe funkciji ima IVAR.IVN480 v velikostih do 54 mm.
Opozorilo: stiskanje in tesnjenje navoja mora opraviti strokovno usposobljen monter z ustreznim stiskalnim orodjem.
Za cevi 22 mm najdete v seriji IVAR.IVN480 tudi prehodke z navoji Rp1/2" in Rp3/4". Celotna serija pokriva dimenzije od 15 mm × Rp1/2" do 54 mm × Rp2".
Tehnični parametri
| Koda | IVN480.2210 |
| Proizvajalec | IVAR |
| Vrsta | IVAR.IVN480 |
| Vrsta fitinga | prehodna matica PRESS × notranji navoj |
| Velikost | 22 mm × Rp1" |
| Lisovnica za cevi | 22 mm |
| Notranji navoj | Rp1" |
| Material | nerjavna jekla AISI 304 (1.4301) |
| tesnilo | O-tesnilo EPDM |
| Tlačna stopnja | PN 16 |
| Delovna temperatura | -20 °C do +85 °C (max. +120 °C) |
| Indikator stiskanja | Da |
Pogosta vprašanja
Za katere cevi je primerna prehodna spojka IVAR.IVN480 22 mm × Rp1"?
Proizvajalec jo navaja za zaprte ogrevalne in hladilne sisteme, solarne kroge, stisnjen zrak in podtlačne sisteme, inertne in tehnične pline, tehnične in obratovalne tekočine ter odpadno in deževnico. Pitna voda ni vključena med te namene.
Na posamezne konce prehodke se priključi: na stiskalno grlo se vstavi in stisne cev dimenzije 22 mm. V notranji navoj Rp1" se privije del z zunanjim navojem ustrezne velikosti.
Kako vem, da je spoj ostal nezalisovan?
Nezalisovani del namerno ne tesni, zato se napaka pojavi pri tlačni preizkušnji. Poleg tega je končan spoj označen z indikatorjem zalisovanja.
Kakšen tlak in temperaturo prenese prehod?
Prehod spada v tlačno razred PN 16 in je namenjen obratovalnim temperaturam od -20 °C do +85 °C, največ do +120 °C. Stisnjeno tesnilo zagotavlja O-obroč iz EPDM.
Dodatni parametri
| Kategorija: | IVAR.IVN80 - prehodi - z notranjim navojem |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | IVN480.2210 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.IVN480 |
| Vrsta fitinga: | prehodni kos PRESS × notranji navoj |
| Dimenzija: | 22 mm × Rp1" |
| Stiskalni nastavek za cev: | 22 mm |
| Notranji navoj: | Rp1" |
| Material: | nerjavno jeklo AISI 304 (1.4301) |
| Tesnilo: | O-tesnilo EPDM |
| Nazivni tlak: | PN 16 |
| Delovna temperatura: | od -20 °C do +85 °C (maks. +120 °C) |
| Indikator stiskanja: | da |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.