Prehodni stiskalni fiting z notranjim navojem IVAR.IVN480 15 mm × Rp1/2", inox AISI 304
Koda: IVN480.1512Podroben opis izdelka
Prehodni fiting IVAR.IVN480 15 mm × Rp1/2" je stiskalni fiting iz nerjavnega jekla 1.4301 (AISI 304), ki stisnjeno napeljavo poveže z navojnim spojem. En konec je stiskalni nastavek za cev dimenzije 15 mm, drugi notranji cevni navoj Rp1/2" (izvedba PRESS × NAVOJ). Na stisnjeni strani spoj tesni O-tesnilo iz EPDM.
Področja uporabe
- zaprti ogrevalni in hladilni sistemi
- solarni sistemi
- stisnjen zrak in vakuumski sistemi
- inertni in tehnični plini
- tehnične in procesne tekočine, industrijska uporaba
- odpadna in padavinska voda
Pitna voda ni med navedenimi nameni uporabe.
Obratovalne vrednosti
- nazivni tlak PN 16
- delovna temperatura od -20 °C do +85 °C, največ +120 °C
Preverjanje stiskanja
Dokler nastavek ni stisnjen, spoj namerno pušča, zato se izpuščeno stiskanje pokaže že pri tlačnem preizkusu. Dokončan spoj dodatno označuje indikator stiskanja. Serija IVAR.IVN480 ima obe funkciji v dimenzijah do 54 mm.
Opozorilo: stiskanje in tesnjenje navoja naj izvede usposobljen monter z ustreznim stiskalnim orodjem.
Za cev 15 mm serija IVAR.IVN480 vključuje tudi prehodni fiting z navojem Rp3/4". Celotna serija pokriva dimenzije od 15 mm × Rp1/2" do 54 mm × Rp2".
Tehnični podatki
| Koda | IVN480.1512 |
| Proizvajalec | IVAR |
| Tip | IVAR.IVN480 |
| Vrsta fitinga | prehodni kos PRESS × notranji navoj |
| Dimenzija | 15 mm × Rp1/2" |
| Stiskalni nastavek za cev | 15 mm |
| Notranji navoj | Rp1/2" |
| Material | nerjavno jeklo AISI 304 (1.4301) |
| Tesnilo | O-tesnilo EPDM |
| Nazivni tlak | PN 16 |
| Delovna temperatura | od -20 °C do +85 °C (maks. +120 °C) |
| Indikator stiskanja | da |
Pogosta vprašanja
Za katere napeljave je primeren prehodni fiting IVAR.IVN480 15 mm × Rp1/2"?
Proizvajalec ga navaja za zaprte ogrevalne in hladilne sisteme, solarne kroge, stisnjen zrak in vakuumske sisteme, inertne in tehnične pline, tehnične in procesne tekočine ter odpadno in padavinsko vodo. Pitna voda ni med temi nameni.
Kaj se priključi na vsak konec fitinga?
V stiskalni nastavek se vstavi in stisne cev dimenzije 15 mm. V notranji navoj Rp1/2" se privije del z zunanjim navojem ustrezne velikosti.
Kako prepoznam, da je spoj ostal nestisnjen?
Nestisnjen nastavek namerno pušča, zato se napaka pokaže pri tlačnem preizkusu. Dokončan spoj dodatno označuje indikator stiskanja.
Kakšen tlak in temperaturo prenese fiting?
Fiting ustreza nazivnemu tlaku PN 16 in je namenjen delovnim temperaturam od -20 °C do +85 °C, največ +120 °C. Stisnjeno stran tesni O-tesnilo iz EPDM.
Dodatni parametri
| Kategorija: | IVAR.IVN80 - prehodi - z notranjim navojem |
|---|---|
| Garancija: | 2 leti |
| Vrsta fitinga: | prehodni kos / prehod |
| Premer cevi: | 15 mm, 110 mm in več |
| Material sistema: | nerjavno jeklo AISI 316 |
| Koda: | IVN480.1512 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.IVN480 |
| Vrsta fitinga: | prehodni kos PRESS × notranji navoj |
| Dimenzija: | 15 mm × Rp1/2" |
| Stiskalni nastavek za cev: | 15 mm |
| Notranji navoj: | Rp1/2" |
| Material: | nerjavno jeklo AISI 304 (1.4301) |
| Tesnilo: | O-tesnilo EPDM |
| Nazivni tlak: | PN 16 |
| Delovna temperatura: | od -20 °C do +85 °C (maks. +120 °C) |
| Indikator stiskanja: | da |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.