Prehodni kos PRESS-PPSU IVAR.PZ PPSU 16 x 1/2" M z zunanjim navojem za cev ALPEX
Koda: 82816762Podroben opis izdelka
Prehodni kos IVAR.PZ PPSU 16 x 1/2" M (koda 82816762) ima na eni strani stiskalni konec za cevi 16x2, na drugi pa zunanji navoj 1/2". Namenjen je priključitvi cevi ALPEX, TURATEC ali PEX na armature z notranjim navojem, na primer na krogelne ali kotne ventile.
Lastnosti
- ohišje iz PPSU, stiskalni tulec iz nerjavnega jekla AISI 304, O-tesnilo EPDM, pozicionirni obroč iz polikarbonata
- največji delovni tlak PN 10, temperaturno območje +3 do +95 °C
- higienski atest za pitno vodo
- vgradna dolžina 58 mm, masa 17 g
- radialno stiskanje s čeljustmi profila B ali F (po navodilih tudi TH)
Montaža
Pri privijanju navojne armature držite ohišje prehodnega kosa proti vrtenju, sicer se lahko cev zasuka v stisnjenem spoju. Za tesnjenje navoja navodila IVAR priporočajo teflonsko nit ali trak; pri konoplji z odobreno pasto naj vrhovi navojev ostanejo vidni, izogibajte se tudi prevelikemu zateznemu momentu. Nestisnjen spoj pri tlačnem preizkusu v območju od 1 do 6,5 bar pušča, zato se razkrije še pred zaprtjem.
Tehnični podatki
| Koda | 82816762 |
| Proizvajalec | IVAR |
| Tip | IVAR.PZ PPSU |
| Vrsta | stiskalni prehodni kos z zunanjim navojem |
| Dimenzija | 16 x 1/2" M |
| Stiskalna stran | Ø 16 mm (ALPEX, TURATEC, PEX 16x2) |
| Navoj | zunanji 1/2" |
| Vgradna dolžina L1 | 58 mm |
| Masa | 17 g |
| Največji delovni tlak | PN 10 |
| Temperaturno območje | +3 do +95 °C |
| Stiskalne čeljusti | B, F (tudi TH) |
| Material | PPSU, tulec AISI 304, O-tesnilo EPDM, obroč PC |
Pogosta vprašanja
Čemu je namenjen prehodni kos 16 x 1/2" M?
Poveže cev ALPEX, TURATEC ali PEX premera 16 mm z armaturo z notranjim navojem 1/2", na primer s krogelnim ali kotnim ventilom.
S čim zatesniti navoj?
Navodila IVAR priporočajo teflonsko nit ali teflonski trak. Pri konoplji z odobreno pasto morajo vrhovi navojev ostati vidni – preveč konoplje ali prevelik moment lahko poškoduje fiting.
Na kaj paziti pri privijanju armature?
Ohišje prehodnega kosa je treba pri privijanju navojne armature držati proti vrtenju, sicer se lahko cev zasuka v stisnjenem spoju.
S katerimi čeljustmi se stisne prehodni kos?
Radialno, s čeljustmi profila B ali F za premer 16 mm; navodila dopuščajo tudi profil TH. Cev pred nasaditvijo kalibrirajte in posnemite, njen položaj pa preverite skozi okenca pozicionirnega obroča.
Dodatni parametri
| Kategorija: | ravni prehodi press n. zunanji |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.017 kg |
| Vrsta fitinga: | prehodni kos / prehod |
| Premer cevi: | 16 mm |
| Material: | nerjavno jeklo |
| Tip priključka: | stiskalni spoj |
| Koda: | 82816762 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.PZ PPSU |
| Vrsta: | stiskalni prehodni kos z zunanjim navojem |
| Dimenzija: | 16 x 1/2" M |
| Stiskalna stran: | Ø 16 mm (ALPEX, TURATEC, PEX 16x2) |
| Navoj: | zunanji 1/2" |
| Vgradna dolžina L1: | 58 mm |
| Masa: | 17 g |
| Največji delovni tlak: | PN 10 |
| Temperaturno območje: | +3 do +95 °C |
| Stiskalne čeljusti: | B, F (tudi TH) |
| Material: | PPSU, tulec AISI 304, O-tesnilo EPDM, obroč PC |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.