PPSU pokrovček IVAR.Z PPSU 16 za zapiranje cevi ALPEX, TURATEC in PEX 16x2
Koda: 82816820Podroben opis izdelka
Pokrovček IVAR.Z PPSU 16 (koda 82816820) zapre konec cevi 16x2 v stiskalnem sistemu IVAR.PRESS – na večplastnih ceveh ALPEX in TURATEC ter na ceveh PEX.
- telo iz polyfenylsulfona (PPSU), stiskalni objem iz nerjavne jekla AISI 304, O-obroč EPDM, zaklepni obroč iz polikarbonata
- največji obratovalni tlak PN 10, temperaturni razpon +3 do +95 °C
- higienski atest za pitno vodo
- konstrukcijska dolžina 31 mm, teža 12 g
- radialno stiskanje s čeljusti s konturo B ali F (glede na navodila tudi TH)
Cev pred vstavljanjem pravokotno odrežite, kalibrirajte in odrgnite ter preverite pravilno lego v oknih pritrdilnega obroča. Pozabljeno vtiskovanje se bo pokazalo kot netesnost pri tlačni preizkušnji v razponu od 1 do 6,5 bara. Enkrat vtisnjena kapica se ne sme ponovno uporabiti.
Tehnični parametri
| Koda | 82816820 |
| Proizvajalec | IVAR |
| Vrsta | IVAR.Z PPSU |
| Vrsta | zamašek (zapiralo) |
| Velikost | 16 |
| Primeren cevovod | ALPEX, TURATEC, PEX 16x2 |
| Gradbena dolžina L1 | 31 mm |
| Teža | 12 g |
| Največji obratovalni tlak | PN 10 |
| Temperaturni razpon | +3 do +95 °C |
| Stiskalni čeljusti | B, F (tudi TH) |
| Material | PPSU, objemka AISI 304, O-obroč EPDM, zaklepni obroč PC |
Pogosta vprašanja
Na kaj služi pokrovček PRESS-PPSU 16?
Zaslepi konec cevi ALPEX, TURATEC ali PEX s premerom 16 mm (16x2). Enkrat stisnjenega pokrovčka ni mogoče ponovno uporabiti.
S katero čeljustjo se privijač privija?
Radialno čeljustjo z konturo B ali F za premer 16 mm, navodilo dopušča tudi konturo TH. Cev pred vstavljanjem pravokotno odrežite, kalibrirajte in odstranite ostre robove.
Ali se pokaže pozabljeno stiskanje?
Da, nezatesnjeno pokrovček pri tlačni preizkušnji v razponu od 1 do 6,5 bar ne tesni, tako da boste napako odkrili še pred pokritjem napeljave.
Dodatni parametri
| Kategorija: | čepi press, push - PPSU |
|---|---|
| Garancija: | 2 leti |
| Teža: | 0.012 kg |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | 82816820 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.Z PPSU |
| Vrsta: | stiskalna kapa (zapiranje) |
| Dimenzija: | 16 |
| Primerne cevi: | ALPEX, TURATEC, PEX 16x2 |
| Vgradna dolžina L1: | 31 mm |
| Masa: | 12 g |
| Največji delovni tlak: | PN 10 |
| Temperaturno območje: | +3 do +95 °C |
| Stiskalne čeljusti: | B, F (tudi TH) |
| Material: | PPSU, tulec AISI 304, O-tesnilo EPDM, obroč PC |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.