Cev PE-RT IVAR 17 × 2 mm za talno ogrevanje – kisikova zapora EVOH, kolut 600 m
Koda: 70017600PPodroben opis izdelka
Cev IVAR.PE-RT 17 × 2 je gibljiva plastična cev za kroge toplovodnega talnega ogrevanja. Izdelana je iz polietilena s povečano temperaturno obstojnostjo (PE-RT) v petplastni izvedbi z difuzijsko kisikovo zaporo EVOH in ustreza standardu EN ISO 22391. Dobavlja se v kolutu dolžine 600 m, rdeče barve.
Lastnosti
- zunanji premer 17 mm, debelina stene 2 mm, notranji premer 13 mm
- prostornina vode 0,133 l na meter
- tlačni razred PN 6 pri 90 °C in PN 10 pri 60 °C
- prepustnost kisika pri 40 °C največ 0,32 g/m³ na dan
- hrapavost 0,007 mm, toplotna prevodnost 0,4 W/m·K
Cev je žilava, dobro prenaša tlak pri visokih temperaturah, ne korodira, se ne zalaga z vodnim kamnom in ima visoko kemično obstojnost. IVAR jo predvideva tudi za suhe sisteme talnega ogrevanja s sistemskimi ploščami IVAR.ST 20 AL in IVAR.ST 30 AL. Cevi se spajajo s stisljivimi spojkami IVAR.TP ali RP oziroma s stiskalnimi fitingi IVAR.PT.
Dimenzija 16 × 2 mm se dobavlja v kolutu 500 m pod kodo 70016500P.
Tehnični podatki
| Koda | 70017600P |
| Proizvajalec | IVAR |
| Tip | IVAR.PE-RT |
| Dimenzija | 17 × 2 mm |
| Notranji premer | 13 mm |
| Prostornina vode | 0,133 l/m |
| Material | PE-RT, petplastna s kisikovo zaporo EVOH |
| Tlačni razred | PN 6 pri 90 °C / PN 10 pri 60 °C |
| Prepustnost kisika (40 °C) | največ 0,32 g/m³ na dan |
| Toplotna prevodnost | 0,4 W/m·K |
| Standard | EN ISO 22391 |
| Barva | rdeča |
| Pakiranje | kolut 600 m |
Pogosta vprašanja
Kakšen tlak in temperaturo cev prenese?
Cev ima tlačni razred PN 6 pri 90 °C in PN 10 pri 60 °C. Območje obratovalnih temperatur po EN ISO 22391 je od 20 do 90 °C.
S katerimi spojkami se cev spaja?
S stisljivimi spojkami IVAR.TP ali RP oziroma s stiskalnimi fitingi IVAR.PT.
Ali ima cev kisikovo zaporo?
Da, gre za petplastno cev PE-RT z difuzijsko kisikovo zaporo EVOH. Prepustnost kisika pri 40 °C je največ 0,32 g/m³ na dan.
Koliko vode je v cevi?
Cev 17 × 2 mm ima notranji premer 13 mm in na meter vsebuje 0,133 l vode.
Dodatni parametri
| Kategorija: | cevi PEX, PE-RT |
|---|---|
| Garancija: | 2 leti |
| Dolžina pakiranja: | nad 200 m |
| Dimenzija cevi: | 17x2 |
| Tip cevovoda: | PE-RT |
| Koda: | 70017600P |
| Proizvajalec: | IVAR |
| Tip: | IVAR.PE-RT |
| Dimenzija: | 17 × 2 mm |
| Notranji premer: | 13 mm |
| Prostornina vode: | 0,133 l/m |
| Material: | PE-RT, petplastna s kisikovo zaporo EVOH |
| Tlačni razred: | PN 6 pri 90 °C / PN 10 pri 60 °C |
| Prepustnost kisika (40 °C): | največ 0,32 g/m³ na dan |
| Toplotna prevodnost: | 0,4 W/m·K |
| Standard: | EN ISO 22391 |
| Barva: | rdeča |
| Pakiranje: | kolut 600 m |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.