Podaljšek DN 125 IVAR.AIRE za izpuste zraka prezračevanja z rekuperacijo, polipropilen IVAR.AIRE
Koda: 78312086Sorodni izdelki
Podroben opis izdelka
Del serije izpustov DN 125
Podaljšek IVAR.AIRE (koda 78312086) spada med dele, ki jih IVAR ponuja za razvod zraka pri prisilnem prezračevanju z rekuperacijo toplote. Tehnični list ga navaja skupaj z 90° izpusti zraka IVAR.AIRC V90 PLUS, pokrovom IVAR.AIRC KR in drugimi elementi s priključkom DN 125. Uporabi se tam, kjer je treba priključek DN 125 podaljšati.
Kam se izpusti vgrajujejo
Izpuste zraka te serije je mogoče vgraditi neposredno v betonski opaž ter v stene, tla ali strope. Nanje se priključijo dizajnerske rešetke ali krožni prezračevalni ventili, uporabni pa so za dovodni in odvodni zrak.
Osnovni podatki
- nazivna velikost: DN 125
- material: polipropilen (PP)
- mere po tehničnem listu: D1 125 mm, D 129 mm, H 137 mm, H1 100 mm
- masa: 0,14 kg
Načrtovanje in montažo prezračevalnega razvoda priporočamo zaupati strokovnemu podjetju.
Tehnični podatki
| Koda | 78312086 |
| Proizvajalec | IVAR |
| Tip | IVAR.AIRE |
| Vrsta izdelka | podaljšek za izpuste zraka |
| Nazivna velikost | DN 125 |
| Material | polipropilen (PP) |
| Premer D1 / D | 125 / 129 mm |
| Višina H / H1 | 137 / 100 mm |
| Masa | 0,14 kg |
| Sistem | prisilno prezračevanje z rekuperacijo |
Pogosta vprašanja
K katerim delom IVAR spada podaljšek DN 125?
Tehnični list ga navaja skupaj z 90° izpusti zraka IVAR.AIRC V90 PLUS in pokrovom IVAR.AIRC KR za vgradnjo v betonski opaž. Ti deli imajo priključek DN 125.
Iz katerega materiala je podaljšek?
Podaljšek je iz polipropilena (PP) in tehta približno 0,14 kg.
Kam se vgrajujejo izpusti zraka te serije?
Vgradijo se lahko v stene, tla in strope, tudi neposredno v betonski opaž. Nanje se priključijo dizajnerske rešetke ali krožni prezračevalni ventili.
Dodatni parametri
| Kategorija: | dodatna oprema za cevi |
|---|---|
| Garancija: | 24 |
| Teža: | 0.14 kg |
| Koda: | 78312086 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.AIRE |
| Vrsta izdelka: | podaljšek za izpuste zraka |
| Nazivna velikost: | DN 125 |
| Material: | polipropilen (PP) |
| Premer D1 / D: | 125 / 129 mm |
| Višina H / H1: | 137 / 100 mm |
| Masa: | 0,14 kg |
| Sistem: | prisilno prezračevanje z rekuperacijo |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.