Ploski hranilnik toplote IVAR.PUFFER 50 KOMPAKT – 50 l, za ogrevanje in hlajenje – AKCIJA IVAR.PUFFER 50 KOMPAKT
Koda: IVAPUF50KSorodni izdelki
Podroben opis izdelka
IVAR.PUFFER 50 KOMPAKT (šifra IVAPUF50K) je ultra ploski hranilnik toplote s prostornino 50 l za sisteme ogrevanja in hlajenja. Na primarno stran se priključita dva vira, na primer toplotna črpalka in plinski kotel, na sekundarno pa dva razdelilna kotlovska modula – hranilnik tako deluje tudi kot hidravlična kretnica.
Zgradba
- dve komori, ločeni s pregrado, in notranji conski ločevalnik za optimalno stratifikacijo
- priključek za toplotno črpalko s pretokom do 4,5 m³/h, ki izkoristi celotno prostornino
- priključek 6/4" za električni grelec do 3 kW, na primer kadar kotla ni
- 4 × 5/4" za primarne vire, 4 × 1" za kotlovske module ali magnetni komplet za odstranjevanje mulja
- jeklo S235 s kataforezno zaščito, izolacija EPP debeline 40 mm (λ 0,034 W/mK)
Montaža in pribor
Hranilnik se obesi na steno na priloženo konzolo; z obratom za 180° lahko izberete priključitev z leve ali desne strani, pri čemer ostaneta dvižni in povratni vod pravilno priključena. V embalaži so tudi samodejni odzračevalni ventil, potopna tulka za tipalo temperature z zunanjim navojem 1/2", tesnila, vijaki in čepi 6/4". Po želji se dopolni z magnetnim kompletom za odstranjevanje mulja IVAR.DIRT 50, kompleti čepov in fitingov ter grelci z močjo 1500, 2000 ali 3000 W. Pred zagonom proizvajalec priporoča temeljito izpiranje celotnega sistema.
Tehnični podatki
| Šifra | IVAPUF50K |
| Proizvajalec | IVAR |
| Tip | IVAR.PUFFER 50 KOMPAKT |
| Prostornina | 50 l |
| Najvišja obratovalna temperatura | +100 °C |
| Najvišji obratovalni tlak | 3 bar |
| Material | jeklo S235, kataforeza 20 µm |
| Toplotna izolacija | EPP 40 mm, λ 0,034 W/mK |
| Primarni priključki | 4 × 5/4" |
| Sekundarni priključki | 4 × 1" |
| Priključek za grelec | 6/4" (do 3 kW) |
| Najvišji pretok toplotne črpalke | 4,5 m³/h |
| Mere | 520 × 860 × 240 mm |
| Masa | 31 kg |
Pogosta vprašanja
Katere vire toplote je mogoče priključiti na hranilnik?
Dva primarna vira, na primer toplotno črpalko s pretokom do 4,5 m³/h in plinski kotel. Če drugega vira ni, je mogoče dodati električni grelec do 3 kW.
Ali je hranilnik primeren tudi za hlajenje?
Da, zaradi popolne toplotne izolacije iz EPP ga je mogoče vgraditi v sisteme ogrevanja in hlajenja.
Kaj je v embalaži?
Hranilnik z izolacijo, stenska konzola, samodejni odzračevalni ventil, potopna tulka za tipalo, tesnila, vijaki, čepi 6/4" in navodila. Čepi z zunanjim navojem 1/2" niso priloženi.
Ali je mogoče izbrati stran priključitve?
Da, hranilnik lahko obrnete za 180° in ga priključite z leve ali desne strani, če dvižni in povratni vod ostaneta pravilno priključena.
Dodatni parametri
| Kategorija: | hranilniki toplote in grelniki tople vode |
|---|---|
| Garancija: | 24 |
| Teža: | 31 kg |
| Šifra: | IVAPUF50K |
| Proizvajalec: | IVAR |
| Tip: | IVAR.PUFFER 50 KOMPAKT |
| Prostornina: | 50 l |
| Najvišja obratovalna temperatura: | +100 °C |
| Najvišji obratovalni tlak: | 3 bar |
| Material: | jeklo S235, kataforeza 20 µm |
| Toplotna izolacija: | EPP 40 mm, λ 0,034 W/mK |
| Primarni priključki: | 4 × 5/4" |
| Sekundarni priključki: | 4 × 1" |
| Priključek za grelec: | 6/4" (do 3 kW) |
| Najvišji pretok toplotne črpalke: | 4,5 m³/h |
| Mere: | 520 × 860 × 240 mm |
| Masa: | 31 kg |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.