Naprava za pripravo vode IVAR.ROBUST 3000 MAX z reverzno osmozo – pretok 150 l/h, mere 470 × 525 × 405 mm
Koda: ESROBUST3000Podroben opis izdelka
Dezmineralizirana voda v večji količini
IVAR.ROBUST 3000 MAX proizvaja visoko kakovostno demineralizirano vodo tam, kjer je je več potrebna: za pripravo tehnološke vode, napajanje parnih kotlov, ogrevalne in hladilne kroge, v gostinski tehnologiji ter v prehrambni in kmetijski industriji. Voda prehaja skozi tri stopnje – s polnilom iz granuliranega aktivnega oglja (AC), blokom iz stisnjenega aktivnega oglja (CTO) in nazadnje z dvema membranama reverzne osmoze 500 GPD.
Delovni podatki
- pretok prečiščene vode 150–160 l/h, napajalne vode 250–300 l/h, koncentrata 100–140 l/h
- Delovni tlak 7–8 bar, tlak vhodne vode 2–5 bar
- vgradni manometri prikazujejo stanje črpalke
- moč 120 W, 230 V / 50 Hz, zaščita IP 54
- priključitev 3/8", teža 25 kg
Vgradnja in servis
Naprava mora biti priključena na gravitacijski kanalizacijski odtok in na vtičnico 230 V v dosegu kabla; okoli nje pustite manipulacijski prostor najmanj 300 mm. V paketu je inštalacijski komplet, prehodna cev in montažni ključi. Namestiti jo lahko lokalna montažna firma, vendar jo mora v obratovanje uvesti pooblaščeno podjetje – v nasprotnem primeru preneha pravica do garancijskih popravil. Predfiltri se zamenjajo po 40.000 l, najpozneje enkrat na 3 mesece, membrane RO pa po 80.000 l, najpozneje enkrat letno (rezervna membrana ESCSV3012500ECO).
Tehnični parametri
| Koda | ESROBUST3000 |
| Blagovna znamka | IVAR |
| Vrsta | IVAR ROBUST 3000 MAX |
| Filtracijski stopnji | lesni peleti AC + blok CTO + 2× membrana RO 500 GPD |
| Pretok prečiščene vode | 150–160 l/h |
| Pretok napajalne vode | 250–300 l/h |
| Vhodni tlak vode | 2–5 bar |
| Delovna temperatura | +5 do +30 °C |
| Priključitev | 3/8" |
| Napajanje | 230 V, 50 Hz |
| Moč | 120 W |
| Pokrov | IP 54 |
| Višina × širina × globina | 470 × 525 × 405 mm |
| Teža | 25 kg |
| Nadomestna membrana | ESCSV3012500ECO (v napravi 2 kosi) |
Pogosta vprašanja
Za kaj se uporablja IVAR.ROBUST 3000 MAX?
Za proizvodnjo kakovostne demineralizirane vode – na primer tehnološke vode, vode za napajanje parnih kotlov, za ogrevalne in hladilne kroge ali za gastro in živilske obrate.
Ali lahko napravo za obdelavo vode vklopim sam?
Montažo lahko izvede lokalna monterska firma, zagon pa mora opraviti pooblaščeno podjetje. Brez tega uporabnik izgubi pravico do garancijskih popravil.
Kako pogosto se zamenjajo filtri in membrane? Predfiltri in nadaljnja filtracija po 40.000 l prečiščene vode, najpozneje vsake 3 mesece; membrane RO po 80.000 l, najpozneje enkrat letno. Pri slabši napajalni vodi so lahko intervali krajši.
Dodatni parametri
| Kategorija: | UV svetilke in reverzne osmoze |
|---|---|
| Garancija: | 2 leti |
| Teža: | 25 kg |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | ESROBUST3000 |
| Znamka: | IVAR |
| Tip: | IVAR.ROBUST 3000 MAX |
| Filtrirne stopnje: | oglje AC + blok CTO + 2× membrana RO 500 GPD |
| Pretok obdelane vode: | 150–160 l/h |
| Pretok napajalne vode: | 250–300 l/h |
| Vstopni tlak vode: | 2–5 bar |
| Delovna temperatura: | +5 do +30 °C |
| Priključek: | 3/8" |
| Napajanje: | 230 V, 50 Hz |
| Moč: | 120 W |
| Stopnja zaščite: | IP 54 |
| Mere (v × š × g): | 470 × 525 × 405 mm |
| Masa: | 25 kg |
| Nadomestna membrana: | ESCSV3012500ECO (2 kosa v napravi) |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.