Naprava za pripravo vode IVAR.CROSS 90 s povratno osmozo – petstopenjska, z mineralizacijo, 90 l/h, 433 × 136 × 452 mm – AKCIJA
Koda: ESMO3600MPECOPodroben opis izdelka
Pet stopinj v treh vzorcih
IVAR.CROSS 90 BALANCE postopoma čisti vodo v treh zamenljivih vložkih. Kompleksni predfilter CF iz kompozitnega polipropilena in bloka aktivnega oglja ujame pesek, mulj in rjo ter zmanjša vsebnost klora in organskih snovi. Sledi membrana reverzne osmoze 600 GPD, ki odstrani do 99,8 % nečistoč, vključno z bakterijami, virusi in PFAS. Nazadnje voda preide skozi mineralizacijski postfilter MCB z aktivnim ogljem – ta izboljša okus in vonj ter obogati vodo z minerali (skupna vsebnost 40–70 mg/l).
Brez rezervoarja, s pregledom stanja
Naprava je pretočno-direktna: s pretokom 1,5 l/min (90 l/h) napolni 200 ml kozarček približno v 8 sekundah. Okrepčno črpalko napaja 230 V. Priprava vode, napake in potreba zamenjave posameznih stopenj signalizira naprava in inteligentna izlivna pipa, del kompleta je tudi zaščita pred uhajanjem vode in inštalacijski komplet.
Vzdrževanje in namestitev
- predfilter CF (ESCPVDFRO): zamenite vsake 12 mesecev ali po 4000 l
- membrana RO (ESCSVRO600DFRO): zamenjava na vsake 24 mesecev ali po 8000 l
- mineralizacijski postfilter MCB (ESPDCBDFRO): enkrat na 12 mesecev ali po 4000 l
Zamenjava vložke je suha in traja do 10 minut. Vhodni tlak vode naj bo 2–5 barov in regulator tlaka pred napravo za pripravo vode je obvezen; naprava je namenjena samo za hladno vodo. Regeneracija vode je 60 %, materiali so certificirani po NSF/ANSI 58.
Tehnični parametri
| Koda | ESMO3600MPECO |
| Blagovna znamka | IVAR |
| Vrsta | IVAR.CROSS90 (IVAR CROSS 90 BALANCE) |
| Sistem | petstopenjski reverzni osmozni sistem z mineralizacijo |
| Neposreden pretok | 1,5 l/min (90 l/h) |
| Membrana | RO 600 GPD |
| Regeneracija (varčevanje z vodo) | 60 % |
| Vhodni tlak vode | 2–5 bar |
| Napajanje | 230 V, 50–60 Hz |
| Višina × širina × globina | 433 × 136 × 452 mm |
| Vsebnost mineralov v pripravljeni vodi | 40–70 mg/l |
| Certifikacija materialov | NSF/ANSI 58 |
| Zamrežja | ESCPVDFRO, ESCSVRO600DFRO, ESPDCBDFRO |
| Zamenjava vložk | suha, do 10 minut |
Pogosta vprašanja
Kako pogosto se zamenjajo vložki v IVAR.CROSS 90?
Kompleksni predfilter CF in mineralizacijski postfilter MCB enkrat na 12 mesecev ali po 4000 l, membrano RO enkrat na 24 mesecev ali po 8000 l. Potreba za zamenjavo bo prikazana na kontrolni lučki na napravi in na iztočni pipi.
Zakaj ima voda po zamenjavi postfiltra drugačen okus?
Novi mineralizacijski in ogljikovi materiali imajo na začetku življenjske dobe maksimalno kapaciteto, zato je sprememba okusa in vonja normalna. Med delovanjem se te lastnosti postopoma stabilizirajo.
Ali lahko napravo priključim tudi na toplo vodo?
Ne, domača naprava z reverzno osmozo je namenjena samo hladni vodi. Dovod mora imeti tlak 2–5 bar in pred napravo je treba namestiti regulator tlaka.
Dodatni parametri
| Kategorija: | UV svetilke in reverzne osmoze |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | ESMO3600MPECO |
| Znamka: | IVAR |
| Tip: | IVAR.CROSS90 (CROSS 90 BALANCE) |
| Sistem: | petstopenjska reverzna osmoza z mineralizacijo |
| Neposredni pretok: | 1,5 l/min (90 l/h) |
| Membrana: | RO 600 GPD |
| Izkoristek (prihranek vode): | 60 % |
| Vstopni tlak vode: | 2–5 bar |
| Napajanje: | 230 V, 50–60 Hz |
| Mere (v × š × g): | 433 × 136 × 452 mm |
| Vsebnost mineralov v obdelani vodi: | 40–70 mg/l |
| Certifikacija materialov: | NSF/ANSI 58 |
| Nadomestni vložki: | ESCPVDFRO, ESCSVRO600DFRO, ESPDCBDFRO |
| Menjava vložkov: | suha, do 10 minut |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.