Servomotor IVAR.SERVOPOHON-L za kotlovske module IVAR.TV3-300 DN 40 – DN 65 – 24 V DC, 0–10 V, 20 Nm IVAR.SERVOPOHON-L
Koda: IVA20317351Sorodni izdelki
Podroben opis izdelka
Servomotor IVAR.SERVOPOHON-L s kodo IVA20317351 poganja tripotni mešalni ventil kotlovskih modulov IVAR.TV3-300 dimenzij DN 40, DN 50 in DN 65 v ogrevalnih in klimatskih sistemih. Poganja ga enosmerni motor na 24 V DC, položaj ventila pa določa notranja elektronika glede na zvezni signal 0–10 V.
Nastavitev glede na sistem
- vhodni signal tovarniško 0–10 V DC, z mostičkom ST2 ga je mogoče spremeniti na 2–10 V DC
- smer vrtenja se izbere z mostičkom ST1
- kot zasuka je elektronsko omejen na 90° in nastavljiv – začetna točka v območju 0–60°, končna v območju 60–120°
- s potenciometrom K se karakteristika pogona zvezno spreminja od konveksne prek linearne (tovarniška nastavitev) do konkavne
Podatki in upravljanje
- navor 20 Nm, poraba toka 100 mA, stopnja zaščite IP 54
- obratovalna temperatura 2 – 110 °C, temperatura okolice 0 – 40 °C
- ohišje iz PC termoplasta, 133 × 146 mm, masa 1,5 kg
Ob prekoračitvi nazivnega navora se pogon sam izklopi. Ne potrebuje vzdrževanja, po pritisku na tipko sklopke pa ga je mogoče premakniti z ročno ročico. Priključitev sme izvesti le oseba z elektrotehnično usposobljenostjo. Izvedba za 230 V s 3-točkovnim krmiljenjem ima kodo IVA20317350.
Tehnični podatki
| Koda | IVA20317351 |
| Proizvajalec | IVAR |
| Tip | IVAR.SERVOPOHON-L |
| Uporaba | kotlovski moduli IVAR.TV3-300 DN 40 / DN 50 / DN 65 |
| Napajalna napetost | 24 V DC |
| Krmilni signal | 0–10 V DC (preklopljiv na 2–10 V DC) |
| Navor | 20 Nm |
| Kot zasuka | 90°, nastavljiv |
| Poraba toka | 100 mA |
| Stopnja zaščite | IP 54 (EN 60529) |
| Obratovalna temperatura | 2 – 110 °C |
| Temperatura okolice | 0 – 40 °C |
| Material ohišja | PC termoplast |
| Dimenzije | š. 133 × v. 146 mm |
| Masa | 1,5 kg |
Pogosta vprašanja
Kateri krmilni signal sprejema servomotor IVAR.SERVOPOHON-L?
Tovarniško je nastavljen na zvezni signal 0–10 V DC, z mostičkom ST2 pa ga je mogoče preklopiti na 2–10 V DC.
Ali je kot zasuka mogoče omejiti?
Da, začetna točka se nastavi s potenciometrom PL v območju 0–60°, končna pa s potenciometrom PR v območju 60–120°. Tovarniško je nastavljen nazivni kot 90°.
Za katere kotlovske module je pogon namenjen?
Za kotlovske module IVAR.TV3-300 s tripotnim mešalnim ventilom dimenzij DN 40, DN 50 in DN 65.
Ali servomotor potrebuje vzdrževanje?
Ne, pogon ne potrebuje vzdrževanja. Pred preobremenitvijo ga ščiti elektronika, ki ga ob prekoračitvi nazivnega navora izklopi.
Dodatni parametri
| Kategorija: | servopogoni za ventile MIX |
|---|---|
| Garancija: | 24 |
| Teža: | 1.5 kg |
| Koda: | IVA20317351 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.SERVOPOHON-L |
| Uporaba: | kotlovski moduli IVAR.TV3-300 DN 40 / DN 50 / DN 65 |
| Napajalna napetost: | 24 V DC |
| Krmilni signal: | 0–10 V DC (preklopljiv na 2–10 V DC) |
| Navor: | 20 Nm |
| Kot zasuka: | 90°, nastavljiv |
| Poraba toka: | 100 mA |
| Stopnja zaščite: | IP 54 (EN 60529) |
| Obratovalna temperatura: | 2 – 110 °C |
| Temperatura okolice: | 0 – 40 °C |
| Material ohišja: | PC termoplast |
| Dimenzije: | š. 133 × v. 146 mm |
| Masa: | 1,5 kg |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.