Nadomestni filtrski vložek IVAR.VL GAS-Z za navojne plinske filtre IVAR.FM DN 15 ÷ DN 25, 10 µm IVAR.VL GAS-Z
Koda: OF-0241Sorodni izdelki
Podroben opis izdelka
Vložek OF-0241 tipa IVAR.VL GAS-Z je namenjen navojnim plinskim filtrom IVAR.FM velikosti DN 15 ÷ DN 25. Njegova poroznost je 10 µm; proizvajalec ponuja ta tip tudi s poroznostjo 10, 20 in 50 µm.
Namen
Filter zadržuje prah in delce, ki jih nosi plin, ter ščiti armature za njim, na primer reducirne ventile, gorilnike ali varnostne elemente. Vložek je namenjen neagresivnim suhim plinom I., II. in III. razreda.
Lastnosti
- novejša izvedba iz kovinske mrežice in sintetičnega flisa, ki lahko nadomesti dosedanji plastični vložek
- najlonsko vlakno s 30 % steklenih vlaken (UNI EN ISO 11667)
- velika filtrirna površina iz sintetičnega pralnega materiala
- filtrirni del je popolnoma izvlečljiv za pregled in čiščenje
Pri vzdrževanju mora biti plinovod brez tlaka. Uporabljajte originalne nadomestne dele, delo pa zaupajte usposobljeni osebi.
Tehnični podatki
| Koda | OF-0241 |
| Proizvajalec | IVAR |
| Tip | IVAR.VL GAS-Z |
| Za filtre | IVAR.FM (navojni) |
| Velikost filtra | DN 15 ÷ DN 25 |
| Poroznost | 10 µm |
| Material | najlonsko vlakno, 30 % steklenih vlaken (UNI EN ISO 11667); kovina |
| Medij | neagresivni suhi plini I., II. in III. razreda |
Pogosta vprašanja
V katere filtre se vgradi ta vložek?
V navojne plinske filtre IVAR.FM velikosti DN 15 ÷ DN 25.
Ali je vložek mogoče čistiti?
Izdelan je iz sintetičnega pralnega materiala, filtrirni del pa je popolnoma izvlečljiv. Pri pregledu ga je mogoče izpihati in očistiti ali zamenjati z novim.
Ali je vložek mogoče uporabiti namesto starejšega plastičnega?
Po tehničnem listu je novejša izvedba iz kovinske mrežice in sintetičnega flisa predvidena tudi kot nadomestilo za dosedanji plastični vložek.
Dodatni parametri
| Kategorija: | IVAR.FM - navojni filtri |
|---|---|
| Garancija: | 24 |
| Koda: | OF-0241 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.VL GAS-Z |
| Za filtre: | IVAR.FM (navojni) |
| Velikost filtra: | DN 15 ÷ DN 25 |
| Poroznost: | 10 µm |
| Material: | najlonsko vlakno, 30 % steklenih vlaken (UNI EN ISO 11667); kovina |
| Medij: | neagresivni suhi plini I., II. in III. razreda |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
