Montažna plošča TECOFIX s podometno omarico 310 x 210 x 85 mm – IVAR.TECOFIX PLATE 02 – AKCIJA IVAR.TECOFIX PLATE 02
Koda: TXA02Sorodni izdelki
Podroben opis izdelka
Montažna plošča TECOFIX s podometno omarico, koda TXA02 (tip IVAR.TECOFIX PLATE 02), je namenjena podometni montaži razdelilnikov hladne in tople vode TECOFIX. Dobavi je priložena podometna inštalacijska omarica, zato je razdelilnik mogoče vgraditi v steno.
Lastnosti
- mere: širina 310 mm, višina 210 mm, globina 85 mm
- material plastika
- vključno s podometno inštalacijsko omarico
- brez pokrivne plošče – plošča IVAR.KPLE 03 ni priložena
Pribor in povezani izdelki
Pokrivno ploščo IVAR.KPLE 03 je treba naročiti posebej; na voljo je v beli, kromirani, srebrni in črni barvi. V sistem TECOFIX spadajo razdelilniki IVAR.TECOFIX CK2 (s 3, 4 in 5 izhodi) in IVAR.TECOFIX CK3 s krogelnimi ventili na izhodih (od 2 do 6 izhodov). Za stensko montažo brez omarice je namenjena montažna plošča TXA01 (240 x 80 mm).
Pri pripravi odprtine v steni računajte z globino 85 mm.
Tehnični podatki
| Koda | TXA02 |
| Proizvajalec | IVAR |
| Tip | IVAR.TECOFIX PLATE 02 |
| Vrsta izdelka | montažna plošča s podometno omarico |
| Sistem | TECOFIX |
| Namen | podometna montaža razdelilnikov hladne in tople vode TECOFIX |
| Širina | 310 mm |
| Višina | 210 mm |
| Globina | 85 mm |
| Material | plastika |
| Pokrivna plošča | ni priložena (IVAR.KPLE 03) |
Pogosta vprašanja
Ali je pokrivna plošča priložena?
Ne. Plošča je dobavljena s podometno inštalacijsko omarico, vendar brez pokrivne plošče IVAR.KPLE 03, ki jo je treba naročiti posebej.
Kakšno globino v steni potrebujem?
Plošča z omarico meri 310 x 210 mm, globina je 85 mm. Po teh merah pripravite odprtino v steni.
Za katere razdelilnike je plošča namenjena?
Za razdelilnike hladne in tople vode sistema TECOFIX, ki se vgrajujejo podometno.
V katerih barvah je na voljo pokrivna plošča KPLE 03?
Pokrivna plošča IVAR.KPLE 03 je na voljo v beli, kromirani, srebrni in črni barvi.
Dodatni parametri
| Kategorija: | dodatna oprema za razdelilnike vode |
|---|---|
| Garancija: | 24 |
| Koda: | TXA02 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.TECOFIX PLATE 02 |
| Vrsta izdelka: | montažna plošča s podometno omarico |
| Sistem: | TECOFIX |
| Namen: | podometna montaža razdelilnikov hladne in tople vode TECOFIX |
| Širina: | 310 mm |
| Višina: | 210 mm |
| Globina: | 85 mm |
| Material: | plastika |
| Pokrivna plošča: | ni priložena (IVAR.KPLE 03) |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.