Modul za pripravo tople vode IVAR.T-FAST iT 30 PRO – 30 l/min
Koda: IVA49060780Podroben opis izdelka
Kompaktni, povsem predhodno sestavljeni modul IVAR.T-FAST iT 30 PRO pripravlja toplo vodo pretočno, šele v trenutku odjema. Energijo jemlje iz akumulacijskega hranilnika, sončnega sistema, kotla ali drugega vira toplote, zato hranilnik tople vode ni potreben.
- Največji pretok skozi sekundarni krog 30 l/min, najmanjši pretok za aktivacijo 2,5 ± 0,3 l/min
- Ploščati prenosnik s površino 1,62 m², največji pretok skozi primarni krog 1800 l/h, padec tlaka na strani tople vode 0,65 bar
- Temperaturo tople vode nastavite v območju 40 ÷ 55 °C s termostatsko glavo, primarno obtočno črpalko Wilo PARA SC 15/1-6 vklaplja zaznavalo pretoka
- Najv. delovni tlak 10 bar, najv. temperatura 90 °C, priključki 3/4″ Ž / 1″ M, mere 610 × 410 × 260 mm, napajanje 230 V AC
Pri vgradnji sta na dovodu hladne vode v prenosnik potrebna protipovratni ventil in raztezna posoda, za zaščito modula pa še magnetni filter IVAR.DIRTSTOP; pri trdoti vode nad 25–30 °fH je potrebna obdelava vode. Cirkulacijski komplet IVAR.KIT iT 30 PRO ni del dobave. Montažo in električni priklop naj opravi strokovnjak.
Tehnični podatki
| Koda | IVA49060780 |
| Proizvajalec | IVAR |
| Tip | IVAR.T-FAST iT 30 PRO |
| Najv. pretok sekundarnega kroga | 30 l/min |
| Najm. pretok | 2,5 ± 0,3 l/min |
| Površina prenosnika | 1,62 m² |
| Najv. delovni tlak | 10 bar |
| Najv. temperatura | 90 °C |
| Priključki | 3/4″ / 1″ (Ž / M) |
| Mere | 610 × 410 × 260 mm |
| Napajanje | 230 V AC; 45 W |
Pogosta vprašanja
Ali je cirkulacijski komplet del modula IVAR.T-FAST iT 30 PRO?
Ne. Komplet IVAR.KIT iT 30 PRO je izbirna oprema in se naroča posebej.
Kaj je treba zagotoviti na strani hladne vode?
Protipovratni ventil in raztezno posodo na dovodu hladne vode v prenosnik ter magnetni filter IVAR.DIRTSTOP za zaščito modula. Pri trdoti nad 25–30 °fH je treba vodo obdelati.
Ali poleg modula potrebujem hranilnik tople vode?
Ne. Voda se v ploščatem prenosniku ogreva pretočno šele ob odjemu, energijo daje vir toplote, na primer akumulacijski hranilnik.
Dodatni parametri
| Kategorija: | stanovanjske postaje IVAR.SAT |
|---|---|
| Garancija: | 2 leti |
| Koda: | IVA49060780 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.T-FAST iT 30 PRO |
| Najv. pretok sekundarnega kroga: | 30 l/min |
| Najm. pretok: | 2,5 ± 0,3 l/min |
| Površina prenosnika: | 1,62 m² |
| Najv. delovni tlak: | 10 bar |
| Najv. temperatura: | 90 °C |
| Priključki: | 3/4″ / 1″ (Ž / M) |
| Mere: | 610 × 410 × 260 mm |
| Napajanje: | 230 V AC; 45 W |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
