Merilnik prevodnosti IVAR.PT-LFS za kartuše IVAR.PERMASOFT – priključek 3/4", meja 20 µS/cm
Koda: IVAPTLFSPodroben opis izdelka
Merilnik IVAR.PT-LFS (koda IVAPTLFS) se vgradi v cev skupaj s kartušo za demineralizacijo IVAR.PERMASOFT ali PERMASOFT ALU in sproti spremlja kakovost vode. Prevodnost meri digitalno in jo primerja s fiksno mejno vrednostjo 20 µS/cm, zato je pri polnjenju ogrevalnega sistema takoj vidno, kdaj je kapaciteta kartuše izčrpana.
Signalizacija
- zelena LED – pravilno delovanje
- pri preseženih 20 µS/cm (pri 20 °C) zelena LED ugasne, rdeča pa začne utripati
- merjenje brez temperaturne kompenzacije
Tehnični podatki
- priključek 3/4"
- najvišja delovna temperatura 40 °C, najvišji delovni tlak 10 barov
- elektroda V4A, konstanta c = 0,6
- napajanje z baterijo z dolgo življenjsko dobo, približno 6 let
Merilnik je električna naprava – po koncu življenjske dobe ga oddajte na zbirno mesto, ne med gospodinjske odpadke.
Tehnični podatki
| Koda | IVAPTLFS |
| Proizvajalec | IVAR |
| Tip | IVAR.PT-LFS |
| Vrsta | pretočni merilnik prevodnosti |
| Namen | kartuše IVAR.PT-PS5000 in PT-PS5000ALU (PERMASOFT) |
| Priključek | 3/4" |
| Mejna vrednost prevodnosti | 20 µS/cm (pri 20 °C) |
| Najv. delovna temperatura | 40 °C |
| Najv. delovni tlak | 10 bar |
| Elektroda | V4A, c = 0,6 |
| Napajanje | baterija (življenjska doba okoli 6 let) |
| Signalizacija | zelena in rdeča LED |
| Temperaturna kompenzacija | brez kompenzacije |
Pogosta vprašanja
Kaj signalizirajo LED na merilniku?
Zelena LED sveti med pravilnim delovanjem. Ko prevodnost preseže 20 µS/cm (pri 20 °C), zelena ugasne, rdeča pa utripa – kapaciteta kartuše je izčrpana.
S katerimi kartušami se merilnik uporablja?
S kartušami za demineralizacijo IVAR.PERMASOFT (IVAPTPS5000) in IVAR.PERMASOFT ALU (IVAPTPS5000ALU), ki imajo priključek 3/4".
Ali merilnik potrebuje omrežno napajanje?
Ne. Napaja ga baterija z dolgo življenjsko dobo, približno 6 let.
Ali ima merilnik temperaturno kompenzacijo?
Ne, meri brez temperaturne kompenzacije. Mejna vrednost 20 µS/cm velja pri temperaturi vode 20 °C.
Dodatni parametri
| Kategorija: | demineralizacijski filtri |
|---|---|
| Garancija: | 2 leti |
| Vrsta: | pribor |
| Velikost navoja: | 3/4" |
| Koda: | IVAPTLFS |
| Proizvajalec: | IVAR |
| Tip: | IVAR.PT-LFS |
| Vrsta: | pretočni merilnik prevodnosti |
| Namen: | kartuše IVAR.PT-PS5000 in PT-PS5000ALU (PERMASOFT) |
| Priključek: | 3/4" |
| Mejna vrednost prevodnosti: | 20 µS/cm (pri 20 °C) |
| Najv. delovna temperatura: | 40 °C |
| Najv. delovni tlak: | 10 bar |
| Elektroda: | V4A, c = 0,6 |
| Napajanje: | baterija (življenjska doba okoli 6 let) |
| Signalizacija: | zelena in rdeča LED |
| Temperaturna kompenzacija: | brez kompenzacije |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.