Mehanski filter IVAR.BIG BLUE 4,5 × 10" – 1" F, brez filtrirnega vložka – AKCIJA
Koda: ESFPV4510ECOPodroben opis izdelka
IVAR.BIG BLUE (koda ESFPV4510ECO) je dvodelni filter iz polipropilena, ki se vgradi na dovodno cev hladne vode. Zgrabi mehanske nesnage – delce rjavine, peska, mulja in usedlin – ter odstrani motnost. Primeren je za vodo iz javnega vodovoda, iz vodnjaka in tudi za deževnico.
Tehnični podatki
- Velikost filtrske vložke 4,5 × 10"
- priključitev 1" notranji navoj
- maksimalni pretok 50 l/min
- Delovni tlak 2 do 6 bar (PN 6), temperatura vode +5 do +40 °C
Primerne filtrirni vložki
- ESCPV45105ECO – 5 µm, 100 % polipropilen (melt-blown)
- ESCHVCB4510ECO – 10 µm, blok iz stisnjenega aktivnega oglja
- ESCHV4510ECO – 40 µm, polnjenje iz granuliranega aktivnega oglja
Pakiranje in montaža
Filtrirajo se filter telo, stenski nosilec s 4 vijaki, montirni ključ za zamenjavo vložke in navodila – filtrska vložka ni vključena v komplet. Montažo prepustite kvalificiranemu inštalaterju, navoje tesnite s PTFE trakom in pred filter proizvajalec priporoča regulator tlaka. Vložko zamenjajte glede na kakovost vode praviloma po 2 do 6 mesecih; posoda filtra ima življenjsko dobo 5 let. Filter ni namenjen topli vodi niti mikrobiološko neustrezni vodi.
Tehnični parametri
| Koda | ESFPV4510ECO |
| Proizvajalec | IVAR |
| Vrsta | IVAR.BIG BLUE |
| Vrsta | dvojdelni filter za mehanske nečistoče |
| Velikost vložke | 4,5 × 10" |
| Priključitev | 1" F |
| Max. pretok | 50 l/min |
| Delovni tlak | 2–6 bar (PN 6) |
| Temperatura vode | +5 do +40 °C |
| Material | polipropilen (PP) |
| Filtracijska vložka | ni del paketa |
| Življenjska doba posode | 5 let |
Pogosta vprašanja
Ali je filtrirni vložek del paketa?
Ne. Paket vsebuje ohišje filtra, stenski nosilec s 4 vijaki, ključ za montažo in navodila. Vložko 4,5 × 10" izberite glede na kakovost vode.
Kateri vložki se prilegajo filtru? V filter 4,5 × 10" se prilegajo vložki ESCPV45105ECO (5 µm, PP melt-blown), ESCHVCB4510ECO (10 µm, blok aktivnega oglja) in ESCHV4510ECO (40 µm, granulirano aktivno oglje).
Kako pogosto je treba vložko zamenjati?
Praviloma vsake 2 do 6 mesecev, odvisno od kakovosti vode, ali po potrebi, ko se zmanjša njena kapaciteta. Proizvajalec priporoča le originalne vložke IVAR.BIG BLUE.
Ali lahko filter uporabljam za toplo vodo?
Ne, filter je namenjen za hladno vodo s temperaturo +5 do +40 °C. Neprimeren je tudi za mikrobiološko neustrezno vodo brez predhodne dezinfekcije.
Dodatni parametri
| Kategorija: | filtri za pitno vodo |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | ESFPV4510ECO |
| Proizvajalec: | IVAR |
| Tip: | IVAR.BIG BLUE |
| Vrsta: | dvodelni filter mehanskih nečistoč |
| Velikost vložka: | 4,5 × 10" |
| Priključek: | 1" NN |
| Najv. pretok: | 50 l/min |
| Delovni tlak: | 2–6 bar (PN 6) |
| Temperatura vode: | +5 do +40 °C |
| Material: | polipropilen (PP) |
| Filtrski vložek: | ni priložen |
| Življenjska doba posode: | 5 let |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.