Bakreni prirobnični izmenjevalnik IVAR.SR6 za hranilnike IVAR.TANKS – prirobnica Ø 290 mm (DN 200), L = 980 mm, 6,34 m²
Koda: 4000612Podroben opis izdelka
Prirobnični izmenjevalnik za sanitarno toplo vodo
IVAR.SR6 je spiralni grelni vložek iz bakrene cevi z zunanjimi rebri, ki se v hranilnik vstavi skozi odprtino prirobnice. Izvedba SR je pocinjena, zato je namenjena segrevanju vode za prehrano in osebno higieno ljudi; nepocinjena serija IVAR.SA je za ogrevalno vodo. S površino 6,34 m² pri dolžini 980 mm je primerna za grelnike vode in hranilnike toplote s prirobnico Ø 290 mm.
Kaj je vključeno
- perforirana prirobnica, pokrov prirobnice in vijaki
- priključek ogrevnega medija 1"
- dielektrični izolacijski komplet IVAR.KIT 500-5 (koda 4000699), ki električno loči baker od jeklene prirobnice in cevovodov
- masa 30,0 kg
Na kaj paziti pri montaži
Dolžina vložka mora biti vsaj 10 cm manjša od premera posode. Pri vstavljanju vložek podložite s plastično podlogo, da baker ne poškoduje zaščite priključka prirobnice, nato podlogo odstranite. Plastičnih navojnih vmesnikov na koncih vložka ni dovoljeno demontirati, dovodni in povratni vod pa je treba pred priklopom trdno pritrditi. Posoda mora biti ozemljena ne glede na to, ali je v njej električni grelnik.
Tehnični podatki
| Koda | 4000612 |
| Proizvajalec | IVAR |
| Tip | IVAR.SR6 |
| Material | baker, pocinjen, z zunanjimi rebri |
| Površina izmenjave | 6,34 m² |
| Dolžina L | 980 mm |
| Prirobnica | Ø 290 mm (DN 200) |
| Priključek | 1" |
| Masa | 30,0 kg |
| Dielektrični komplet | IVAR.KIT 500-5 (4000699) |
| Namen | segrevanje vode za prehrano in osebno higieno ljudi |
Pogosta vprašanja
Kakšna je razlika med vložki IVAR.SR in IVAR.SA?
Vložki IVAR.SR so pocinjeni in namenjeni segrevanju vode za prehrano in osebno higieno ljudi. Nepocinjeni vložki IVAR.SA so namenjeni segrevanju ogrevalne vode.
V kakšno posodo gre vložek IVAR.SR6?
Potrebna je prirobnica Ø 290 mm (DN 200). Vložek mora biti vsaj 10 cm krajši od premera posode, pri dolžini 980 mm mora torej posoda imeti premer vsaj 1080 mm.
Čemu služi dielektrični komplet in ali je priložen?
Komplet IVAR.KIT 500-5 električno loči bakreni vložek od jeklene prirobnice in cevi ter tako ščiti posodo pred korozijo. Po tehničnem listu je del vložka; njegovih plastičnih vmesnikov ni dovoljeno odstraniti.
Dodatni parametri
| Kategorija: | grelni vložki za hranilnike |
|---|---|
| Garancija: | 2 leti |
| Teža: | 30 kg |
| Vrsta: | konzola / drugo |
| Koda: | 4000612 |
| Proizvajalec: | IVAR |
| Tip: | IVAR.SR6 |
| Material: | baker, pocinjen, z zunanjimi rebri |
| Površina izmenjave: | 6,34 m² |
| Dolžina L: | 980 mm |
| Prirobnica: | Ø 290 mm (DN 200) |
| Priključek: | 1" |
| Masa: | 30,0 kg |
| Dielektrični komplet: | IVAR.KIT 500-5 (4000699) |
| Namen: | segrevanje vode za prehrano in osebno higieno ljudi |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.