Kopalniški regulacijski ventil OPTIMA IVAR.DV 023 ravni – 1/2" × M24, krom
Koda: 530009CHROMPodroben opis izdelka
Povratni ventil za kopalniške radiatorje
IVAR.DV 023 spada v serijo kopalniške armature OPTIMA, ki združuje funkcionalnost z urejenim videzom. Ravni ventil se v radiator privije z zunanjim navojem 1/2", na razvod pa se priključi prek navoja M 24 × 1,5 s stiskalnim spojem za bakreno ali plastično cev. Par mu je termostatski ventil OPTIMA IVAR.DV 013 v enaki izvedbi.
Funkcije
- regulacija pretoka vode skozi radiator ali njegovo popolno zaprtje
- izklop radiatorja brez praznjenja celotnega sistema
- kalibrirana zaslonka s šestimi položaji (Kv 0,1 do 0,6), nastavi se s ključem 13 mm
- vsebuje termostatski vložek, zato je mogoča poljubna priključitev dvižnega in povratnega voda
- zaščitni pokrovček varuje navoj pri montaži in služi tudi za zapiranje
Material in montaža
Ohišje je iz kromirane medenine CW617N, tesnila iz peroksidno zamreženega EPDM, glava pa iz plastike ABS; adapter IVAR.AVK 01 je sestavni del armature. Ventil prenese PN 10, diferenčni tlak 1 bar in +100 °C. Navoje tesnite s teflonskim trakom, nitjo, pasto ali gelom, ne s konopljo. Pred zagonom je treba celoten ogrevalni sistem sprati.
Tehnični podatki
| Koda | 530009CHROM |
| Proizvajalec | IVAR |
| Tip | IVAR.DV 023 |
| Serija | OPTIMA |
| Izvedba | ravni |
| Površinska obdelava | krom |
| Priključek na radiator | zunanji navoj 1/2" |
| Priključek na razvod | M 24 × 1,5 (stiskalni spoj) |
| Maks. delovni tlak | PN 10 |
| Maks. diferenčni tlak | 1 bar |
| Maks. delovna temperatura | +100 °C |
| Prednastavitev | 6 položajev, Kv 0,1–0,6 |
| Material | medenina CW617N, tesnila EPDM |
Pogosta vprašanja
Čemu služi regulacijski ventil OPTIMA IVAR.DV 023?
Montira se na kopalniški radiator, omejuje ali popolnoma zapre pretok in omogoča izklop radiatorja brez praznjenja sistema. V paru se uporablja termostatski ventil OPTIMA IVAR.DV 013.
Kako se nastavi pretok?
S ključem 13 mm vrtite stožec, dokler oznaka ne kaže projektiranega položaja od 1 do 6. Položaj 1 pomeni najmanjši, položaj 6 največji pretok; vmesnih položajev ni mogoče nastaviti.
S čim tesniti navoje?
Proizvajalec priporoča teflonske trakove, vrvice ali niti ter tesnilne paste in gele. Konoplja ni priporočljiva, ker lahko prekomerno navijanje povzroči razpoko medeninastega ohišja.
Dodatni parametri
| Kategorija: | regulacijski holandci OPTIMA - ravni / kotni, triosni |
|---|---|
| Garancija: | 2 leti |
| Velikost navoja: | 1/2" |
| Vrsta: | kopalniška armatura OPTIMA |
| Izvedba ventila: | ravni |
| Koda: | 530009CHROM |
| Proizvajalec: | IVAR |
| Tip: | IVAR.DV 023 |
| Serija: | OPTIMA |
| Izvedba: | ravni |
| Površinska obdelava: | krom |
| Priključek na radiator: | zunanji navoj 1/2" |
| Priključek na razvod: | M 24 × 1,5 (stiskalni spoj) |
| Maks. delovni tlak: | PN 10 |
| Maks. diferenčni tlak: | 1 bar |
| Maks. delovna temperatura: | +100 °C |
| Prednastavitev: | 6 položajev, Kv 0,1–0,6 |
| Material: | medenina CW617N, tesnila EPDM |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.