Kopalniško regulacijsko šrobovje OPTIMA IVAR.DV 023 direktno – 1/2" × M24, krom
Koda: 530009CHROMPodroben opis izdelka
Krogelni ventili za kopalniško pohištvo
IVAR.DV 023 spada v serijo kopalniških armatur OPTIMA, ki združuje funkcionalnost z elegantnim videzom. Neposredno šrobanje se privije na telo z zunanjim navojem 1/2" in se priključi na razdelilnik preko navoja M 24 × 1,5 z navojnim šrobom za bakrene ali plastične cevi. Kot par mu služi termostatski ventil OPTIMA IVAR.DV 013 v enakem izvedbi.
Funkcije
- regulacija pretoka vode telesom ali njegovo popolno zaprtje
- odklop telesa brez praznjenja celotnega sistema
- kalibrirana šesterostopenjska šoba (Kv 0,1 do 0,6), nastavljiva s ključem 13 mm
- vključuje termostatsko vložko, zato je možna variabilna priključitev dovoda in povratka
- Zaščitna kapica ščiti navoj med montažo in služi tudi za zaprtje
Material in montaža
Telo je iz medenega bronza CW617N s kromirano površinsko obdelavo, tesnila iz peroksidom vulkaniziranega EPDM in glava iz ABS plastike; del armature vključuje adapter IVAR.AVK 01. Priključki prenesejo PN 10, diferenčni tlak 1 bar in temperaturo +100 °C. Navoje tesnite s teflonsko trako, nitjo, pasto ali gelom, ne s konopljo. Pred zagonom je treba celoten ogrevalni sistem sprati.
Tehnični parametri
| Koda | 530009CHROM |
| Proizvajalec | IVAR |
| Vrsta | IVAR.DV 023 |
| Radi | OPTIMA |
| Izvedba | neposredne |
| Površinska obdelava | krom |
| Priključitev na ohišje | 1/2" zunanji navoj |
| Priključitev na napeljavo | M 24 × 1,5 (divja vijak) |
| Največji obratovalni tlak | PN 10 |
| Največji diferenčni tlak | 1 bar |
| Največja obratovalna temperatura | +100 °C |
| Prednastavitev | 6 položajev, Kv 0,1–0,6 |
| Material | medenina CW617N, tesnila EPDM |
Pogosta vprašanja
Za kaj služi regulacijska šraufna OPTIMA IVAR.DV 023?
Vgradi se na kopalniško ogrevalno telo, omejuje ali popolnoma zapira pretok in omogoča, da se telo izklopi brez praznjenja sistema. Kot proti del se uporablja termostatski ventil OPTIMA IVAR.DV 013.
Kako se nastavlja pretok?
S ključem 13 mm zavrtite stožec, dokler risba ne kaže želeno pozicijo 1 do 6 glede na projekt. Pozicija 1 pomeni najmanjši in pozicija 6 največji pretok; vmesne pozicije ni mogoče nastaviti.
S čim naj tesnim navoje?
Proizvajalec priporoča teflonske trakove, vrvice ali niti, pa tudi tesnilne paste in gele. Konop ne priporočamo, ker pri prekomernem navijanju obstaja nevarnost pretrganja medeninastega telesa.
Dodatni parametri
| Kategorija: | regulacijski holandci OPTIMA - ravni / kotni, triosni |
|---|---|
| Garancija: | 2 leti |
| Razpoložljivost: | Na zalogi ali pri dobavitelju |
| Koda: | 530009CHROM |
| Proizvajalec: | IVAR |
| Tip: | IVAR.DV 023 |
| Serija: | OPTIMA |
| Izvedba: | ravni |
| Površinska obdelava: | krom |
| Priključek na radiator: | zunanji navoj 1/2" |
| Priključek na razvod: | M 24 × 1,5 (stiskalni spoj) |
| Maks. delovni tlak: | PN 10 |
| Maks. diferenčni tlak: | 1 bar |
| Maks. delovna temperatura: | +100 °C |
| Prednastavitev: | 6 položajev, Kv 0,1–0,6 |
| Material: | medenina CW617N, tesnila EPDM |
Ocena izdelka
Bodite prvi, ki bo objavil članek k tej postavki!
Razprava
Bodite prvi, ki bo objavil članek k tej postavki!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.